Audited Supplier
MF-35KW
CE, ISO
Vertical
Industrial
Crucible Melting Furnace
Steel Molding
Electric
10kg
25kw
5-20kHz
ORD
Wooden Box
CE, SGS, ISO
China
8514400090
Product Description
MF-35KW Power induction melting furnace machine for steel, iron cast iron ,copper etc with 10KG furnace:
Advantage:
1 Stable Performance, more than 21 years experience
2 CE certificated, good quality
3 Cooperated with CHOW TAI FOOKS, Matsushita, , Foxconn, Media, Gree and ZHIGAO air conditioning
4 High Speed Melting
5 Can melt all kinds of the metals.
1) IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2) 100% Duty cycle, continuous working is allowed at maximum power output.
3) Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
4) Display of heating power and heating current and oscillating frequency;
5) Simple to install, Installation can be done by unprofessional person very easily
6) Light weight
7) The separated models are designed to fit the dirty surrounding of some cases.
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Advantage:
1 Stable Performance, more than 21 years experience
2 CE certificated, good quality
3 Cooperated with CHOW TAI FOOKS, Matsushita, , Foxconn, Media, Gree and ZHIGAO air conditioning
4 High Speed Melting
5 Can melt all kinds of the metals.
1) IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2) 100% Duty cycle, continuous working is allowed at maximum power output.
3) Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
4) Display of heating power and heating current and oscillating frequency;
5) Simple to install, Installation can be done by unprofessional person very easily
6) Light weight
7) The separated models are designed to fit the dirty surrounding of some cases.
| Type | MF-35KW-10KG |
| Work Power | 3×380V/415V,440V,480V |
| The range of operating voltage | 340-430v |
| Output power | 35KW |
| Input current | 53A |
| Average Melting time | 30minutes |
| Fluctuating frequency | 1-20khz |
| Timing (Heat time, Retain time , Cool time) | 1-99s |
| The flow rate of cooling water | 0.08-0.16 Mpa 16L/Min |
| Water temperature protection point | |
| Duty cycle | 100% (40degree room temperature) |
| Weight: | Main parts: 55KG Extensive Parts: 45kg |
| Size: | Main Parts: 650*550*360mm Extensive Parts: 550*300*550mm |
1. recommend the most suitable machine for customers, according to their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
