Audited Supplier
This gas mask is made of chlorobutyl rubber, which is the best anti-virus effect on the market, and protect against radioactive dust.
The mask has a hydration interface that allows the wearer to rehydrate at any time.
Adopt RD40 universal interface, suitable for various types of canisters.
The headband is adjustable and has good elasticity to ensure comfortable wearing and air tightness.
The lenses are made of polycarbonate with special surface treatment, which has good optical, wear-resistant and impact-resistant properties.
Capable of filtering all kinds of toxic gases and aerosols except carbon monoxide.
Low resistance, light weight and long service life.
1. The time for preventing cyanogen chloride should not be less than 30min (30L/min, 1.5mg/L, relative humidity 80-80%);
2. The oil mist transmission rate is not more than 0.005% (30L/min);
3. Inhalation resistance is not more than 186 Pa (30L/min);
4. The expiratory resistance is not more than 90 Pa (30L/min);
5. Field of view: the total field of view is not less than 60%, and the binocular field of view is not less than 15%;
6. Weight: the full set of masks weighs about 1100g;
7. Storage life: 5 years.
1. The gas masks are divided into three sizes according to small, medium and large, which are marked with 1, 2, and 3 on the lower left of the cover respectively. Users can choose the appropriate mask according to their head size. The method is: use a measuring ruler to measure the distance from the center of the lower edge of the wearer's chin to the midpoint of the inner corner of the eyes. Then determine the mask model according to the range of 1, 2, and 3 numbers on the size.
2. The entire mask, especially the lens and exhalation valve, should be kept clean, and the mask part can be washed with clean water if necessary.
3. After the canister absorbs moisture, its anti-virus ability will be reduced, so it is strictly forbidden to enter water. Usually, the canister cover should be tightened and the bottom plug should be fastened.
4. The mask should be stored in a cool and dry place. When not in use for a long time, a bracket should be placed in the mask to avoid deformation and should not be in contact with organic solvents.
Xi′an Personal Protective Equipment Co., Ltd was founded in 1956. Located in Xi′an, which is one of the four ancient capitals of China. Our company hold own brand "PPE PLUS". Supply full range of PPE solution. PPE PLUS is leading security equipment supplier in Northwest of China. We combined innovative, manufacturing, distribution. And introduce advanced technology VR online experience technology, so that our customers can experience personal protection products in virtual scenes.
Comply with hand protection, head protection, as well as respiratory equipment and site and civil safety products. Cover 134 countries and regions. Our long history experience PPE solution power enables us to produce world-class safety products offer to the highest quality. We attended professional PPE exhibition, like German A + A, American NSC, Brazil FISP, China CIOSH and so on. Established close cooperation with many foreign customers.
The PPE PLUS is recognized for its unique innovation and extremely high quality, distributed through a network of Preferred Distributors globally. We are dedicated to empowering our distributors with the tools, products, knowledge, and help our clients succeed in business.
