Audited Supplier
PT100 Element
RoHS, CE
Customized
Customized
Customized
Customized
Heraeus
Temperature Sensor
MICC
Cartons
Customized
Jiangsu, China (Mainland)
Product Description
Mseries PRTDs are designed for large volume applications where long term stability, interchangeability and accuracy over a large temperature range are vital. Typical applications are Automotive, White goods,
HVAC, Energy management, Medical and Industrial equipment.
The measuring point for the nominal resistance is defined at 8 mm from the end of the sensor body.
HVAC, Energy management, Medical and Industrial equipment.
The measuring point for the nominal resistance is defined at 8 mm from the end of the sensor body.
| Nominal Resistance R0 | Tolerance | Order Number Plastic Box |
| 100 Ohm at 0º C | DIN EN 60751, class B | 32 208 548 |
| DIN EN 60751, class A | 32 208 550 | |
| DIN EN 60751, class 1/3 DIN | 32 208 551 | |
| 500 Ohm at 0º C | DIN EN 60751, class B | 32 208 706 |
| 1000 Ohm at 0 | DIN EN 60751, class B | 32 208 571 |
| DIN EN 60751, class A | 32 208 572 | |
| DIN EN 60751, class 1/3 DIN | 32 208 707 |
| Specification | DIN EN 60751 (according to IEC 751) |
| Temperature range | -70º C to +500º C (continuous operation) (temporary use to 550º C possible) Tolerance class B: - 70º C to + 500º C Tolerance class A: - 50º C to + 300º C Tolerance class 1/3 DIN: 0º C to + 150 º C |
| Temperature coefficient | TC = 3850 ppm/K |
| Leads | Pt clad Ni wire |
| Long-term stability | max. R0-drift 0.04% after 1000 h at 500º C |
| Vibration resistance | at least 40 g acceleration at 10º C to 2000 Hz, depends on installation |
| Shock resistance | at least 100 g acceleration with 8ms half sine wave, depends on installation |
| Shock resistance | at least 100g acceleration at frequencies from 10Hz up to 2000Hz, depends on the installation |
| Environmental conditions | Unhoused for dry environment only |
| Insulation resistance | > 100 MΩ at 20º C; > 2 MΩ at 500º C |
| Self heating | 0.4 K/mW at 0º C |
| Response time | Water current (v= 0.4m/s): t0.5 = 0.05s, t0.9 = 0.15s Air stream (v= 2m/s): t0.5 = 3.0s, t0.9 = 10.0s |
| Measuring current | 100Ω : 0.3 to 1.0 mA 500Ω : 0.1 to 0.7 mA 1000Ω : 0.1 bis 0.3 mA (self heating has to be considered) |
| Note | Other tolerances, values of resistance and wire lengths are available on request. |
