Audited Supplier
PP-1-10"-222
PP/PTFE/Pes/PVDF
Industry, Food and Beverage, Medicine, Water Treatment
PP Filter
DOE/222flat/222fin/226fin/226flat/ Thread
Fine
5"/10"/20"/30"/40"
69mm
30mm
0.1/0.22/0.45/1.0/5.0micron
LWFE
Polybag and Paper Box
China
8421999090
Product Description
Pleated filter cartridge is composed of filter layer, brace layer, acquisition distribution layer, shell and lid, center rod, joint and seal ring. The pleated structure increases the filtration area, increases the flux, and enhances the dirt holding capacity. . The filter layer is available in a variety of materials, with a wide range of filtration accuracy, and can be applied to many fields such as water filtration, chemical filtration, and air sterilization filtration. In the case of low temperature, the shell is generally made of PP. In the case of high temperature, the shell can be made of PFA or PVDF, or the strength can be increased by adding stainless steel lining.
Filter Materials and Filtration Accuracy:
Other product parameters:
Filter Materials and Filtration Accuracy:
| Filter Materials | Filtration Accuracy |
| PP | 0.45-50μm |
| PVDF | 0.10/0.22/0.45/0.65/1.0μm |
| Nylon | 0.22+0.22/0.22/0.45/0.65/1.0μm |
| PES(single layer) | 0.02/0.05/0.10/0.22/0.45/0.65/0.80/1.20μm |
| PES(double layer) | 0.10+0.10/0.22+0.22/0.45+0.45/0.10+0.22/0.22+0.45/0.45+0.80μm |
| PTFE(hydrophilic) | 0.01/0.05/0.10/0.22/0.45μm |
| PTFE(hydrophobic) | 0.10/0.22/0.45/1.0μm |
Other product parameters:
| Brace layer material | PP |
| Acquisition Distribution layer | PP |
| Shell and Lid material | PP/PVDF |
| Center rod material | PP/PVDF/PFA/Stainless steel |
| Joint material | PP,PVDF,PFA,PP+ Stainless steel tube |
| Diameter | Outer diameter(69mm) and Inside diameter(30mm) |
| Length | 5"/10"/20"/30"/40" |
| Joint type | DOE/222Flat/222Fin/226Fin/226Flat/ Thread |
| Seal ring material | Silicone rubber / Fluorine rubber / EPDM / Nitrile rubber |
