Audited Supplier
Alloy: 1050, 1060, 1100, 1200, 3003
Transportation Tools, Transformer
Cold Drawn
1000 Series
O - H112
Mill Finish
Non-alloy
Aluminum Strip
0.15-10mm
30-2000mm
as Customer's Request
Aluminum Strips
Flat
GY
Export Standard, Wooden Pallet or Wooden Case
ASTM B209, SGS
Guangdong, Yunfu City
7606
Product Description
Mill Finished Aluminum/Aluminium Plain Tape/Belt/Strip for Transformer Winding:
Product Description
1), Alloy we supply:
1050/1060/1070/1100/3003/3004/3103/3104/5005/5052/5083/5182/5754/6005/6061/6063/8011, etc.
For the above-mentioned alloy, you may be interested in:
CC aluminum strip/coil: Means Continuous Casting coil, it can not be used for deep drawing and anodising, but it can be bend over 90 degrees.
DC aluminum strip/coil: Means Direct casting coil, it can be used for deep drawing and anodising.
2), Size we supply:
Thickness: (0.15-4.0)mm, Width: (20-1500)mm and other special width.
Length: Strip/Coil
Thicnk tolerance: +/-0.01mm
3), Temper:
HO/H14/H24/H16/H18/H19/H32/H111/H112/T6/T651, etc.
4), Packing:
For Sheet Packing:
2-2.5mts per pallet, standard international export packing,
For Coil Packing:
Eye to wall or Eye to Skype packing, 2-3mts per coil or 5-7mts per coil,
Coil ID: 505MM/508MM
Customer may require interleaf papers into sheets or require blue protective PE film on sheet&coil surface.
5), Strip/Coil/ sheet surface requirement:
No scratches, white corrosion, water stain, black stain marks, oil stain or streak marks.
6) Ending Application:
Construction, decoration, electronic products, wall Cladding, Truck body, Signboard, Insulation, Ceiling, aerospace, aviation, household appliance, lighting, and some other areas, etc.
Terms and conditons:
1, Trade temr: CIF/CFR/FOB/EXW
2), Payment term: TT/West Union/100% Irrevocable L/C at sight
3), Shipment: It will cost us about 25-30 days after 30% deposit reaching our USD bank account(TT) or after we receive the L/C copy.
4), MOQ: 1ton for each thickness.
5), Quantity tolerance: +/-10% of total quantity as confirmed PI.
Product Description
1), Alloy we supply:
1050/1060/1070/1100/3003/3004/3103/3104/5005/5052/5083/5182/5754/6005/6061/6063/8011, etc.
For the above-mentioned alloy, you may be interested in:
CC aluminum strip/coil: Means Continuous Casting coil, it can not be used for deep drawing and anodising, but it can be bend over 90 degrees.
DC aluminum strip/coil: Means Direct casting coil, it can be used for deep drawing and anodising.
2), Size we supply:
Thickness: (0.15-4.0)mm, Width: (20-1500)mm and other special width.
Length: Strip/Coil
Thicnk tolerance: +/-0.01mm
3), Temper:
HO/H14/H24/H16/H18/H19/H32/H111/H112/T6/T651, etc.
4), Packing:
For Sheet Packing:
2-2.5mts per pallet, standard international export packing,
For Coil Packing:
Eye to wall or Eye to Skype packing, 2-3mts per coil or 5-7mts per coil,
Coil ID: 505MM/508MM
Customer may require interleaf papers into sheets or require blue protective PE film on sheet&coil surface.
5), Strip/Coil/ sheet surface requirement:
No scratches, white corrosion, water stain, black stain marks, oil stain or streak marks.
6) Ending Application:
Construction, decoration, electronic products, wall Cladding, Truck body, Signboard, Insulation, Ceiling, aerospace, aviation, household appliance, lighting, and some other areas, etc.
Terms and conditons:
1, Trade temr: CIF/CFR/FOB/EXW
2), Payment term: TT/West Union/100% Irrevocable L/C at sight
3), Shipment: It will cost us about 25-30 days after 30% deposit reaching our USD bank account(TT) or after we receive the L/C copy.
4), MOQ: 1ton for each thickness.
5), Quantity tolerance: +/-10% of total quantity as confirmed PI.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Other | Al | ||
| Single | Total | ||||||||||||
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.6 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.5 |
| 1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | _ | 0.1 | _ | _ | 0.05 | 0.15 | 99 | |
| 1200 | Si+Fe:1.00 | 0.05 | 0.05 | _ | _ | 0.1 | _ | 0.05 | 0.05 | 0.15 | 99 | ||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | _ | 0.1 | _ | 0.05 | 0.15 | R | |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | _ | _ | 0.25 | _ | 0.05 | 0.15 | R | |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.20~0.6 | 0.1 | _ | 0.25 | 0.1 | 0.05 | 0.15 | R | |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | _ | 0.4 | 0.1 | 0.05 | 0.15 | R | |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | _ | 0.25 | _ | _ | 0.05 | 0.15 | R |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | _ | 0.1 | _ | _ | 0.05 | 0.15 | R |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | _ | 0.25 | _ | 0.15 | 0.05 | 0.15 | R |
| 5086 | 0.4 | 0.5 | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | _ | 0.25 | _ | 0.15 | 0.05 | 0.15 | R |
