Audited Supplier
WZ30-25
1 Years
1 Years
Backhoe Loader
Special Excavator
Shovel
Mechanical Transmission
Electric Drive
0.5~1.0m³
Medium-Sized
CE, ISO9001: 2000
New
7640kg
5910X2268X3760mm
2250mm
1.0m3
2500kg
2742mm
52mm
0.3m3
Ytr4108g60-1
55kw
KUDAT
in Nude Package
CE
China
8429510000
Product Description
WZ30-25 backhoe loader adopted the USA John Deere backhoe loader technology, its engine, main pumps, motor, valve, etc. are from China first-class factories. It is widely used in municipal projects, building, raod maintenance, water conservancy, electricity supply, and so on.
Main Feature
Cabin
Humanized design, luxurious damping seat with 360°rotating, wide-vision glass, easy for operation.
Power system
R4105/R4110 diesel engine made by YTO or Weichai China, vertical, 4-strock, water cooled 55kW/67kW diesel engine.
R4105/R4110 diesel engine made by YTO or Weichai China, vertical, 4-strock, water cooled 55kW/67kW diesel engine.
Transmission system
Fully hydraulic system, rear hoe part adopts pilot control, and front load part could be equipped with pilot control, as option.
Double rocker arm for front load part.
Double rocker arm for front load part.
Side slide for rear hoe part, sliding range 1.2m.
Technical parameter as below:
Technical parameter
1. Overall Dimension
| Operating weight | 7640Kg | Final Reducer | Single stage final reducer |
| Transportation dimension | 5910x2268x3760mm | Rated Loader of Axle | 7.5t |
| Wheel base | 2250mm | Transmission system | |
| Torque Convertor | |||
| Min. ground clearance | 300mm | Model | YJ280 |
| Loading bucket capacity | 1.0m3 | Type | Single-stage, Three elements |
| Breakout force | 38KN | Max. efficiency | 84.4% |
| Loading lifting capacity | 2500kg | Inlet pressure | 0.4Mpa---0.55Mpa |
| Bucket dumping height | 2742mm | Outlet pressure | 1.2Mpa-1.5Mpa |
| Bucket dumping distance | 1062mm | Cooling method | Oil-cooling Pressure Circulation |
| Digging depth | 52mm | Gearbox | |
| Backhoe capacity | 0.3m3 | Type | Fixed shaft power transmission |
| Max.digging depth | 4082mm | Oil pressure of clutch | 1373Kpa --- 1569Kpa |
| Swing Angle of Excavator Grab | 190° | Gears | Two gears forward, two gears backward |
| Max. puling force | 39KN | Max. Speed | 22Km/h |
| Engine | Tyre | ||
| Model | YTR4108G60-1 | Model | 16/70---20 |
| Type | Vertical, direct inject, 4-stroke, combustion chamber | Pressure of front wheel | 0.22 Mpa |
| Pressure of rear wheel | 0.22 Mpa | ||
| Cylinder-Inside diameter*stroke | 4---108*120 | Brake system | |
| Rated power | 55KW | Service brake | Air over oil caliper brake |
| Rated speed | 2400r./min. | External type | |
| Min. fuel consumption | ≤216g/km.h | Self-regulation | |
| Max. Torque | ≥261.7N.M/1800r./min. | Self-balance | |
| Displacement | 4.4L | Emergency brake | Power asst. |
| Manual asst. | |||
| Steering system | |||
| Model of steering device | BZZ5---250 | Hydraulic system | |
| Steering angle | ± 36° | Hoe bucket digging power | 46.5KN |
| Type | 5018mm | Dipper digging power | 31KN |
| Model of tuming control valve | 12Mpa | Bucket lifting time | 5.4S |
| Axle | Bucket lowering time | 3.1S | |
| Main transmission type | Double reduction | Bucket discharge time | 2.0S |
1. Overall Dimension
| No. | Description | Parameter |
| 1 | Overall Length | 5900mm |
| 2 | Overall Width | 2300mm |
| 3 | Overall Height | 3769mm |
| 4 | Cab roof height | 2900mm |
| 5 | Wheelbase | 2250mm |
| 6 | Track | 1640mm |
| 7 | Mini. Ground Clearance | 300mm |
| 8 | Max. Gradeability | 30° |
