Audited Supplier
TM-FX37 Mini Fiber Fusion Splicer
Main characteristics
1. 4.3-inch high definition capacitive touch screen.
2. 320 times image magnification,5mm fusion splicing for fibers of ultra-short cutting length
3. 300 groups of fusion splicing modes,100 groups of heating modes
4. USB and SD card interfaces,U-disk automatic software upgrade
5 .built-in modular lithium battery,supports 330 times of splicing and heating.
6. 7s fast fusion splicing,18s highly efficient heating.
7. Precise fiber core alignment,ultra-low fiber fusion splicing consumption
8.10000 groups of fusion records,64 images storage
9. Ceramic presser foot,ceramic V-block,all-in-one fixture
10. Dual-direction splicing,automatic splicing,intelligent pyrocondensation
Alignment method Precise core alignment and cladding alignment Applicable fibers
Any common optical fibers.rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653,ITU-TG.655 and ITU-TG.657
Optical fiber diameter Cladding:80~150mm,coatinglayer:0.1~3mm
Cuttlinglength 5-16mm(coated optical fiber diameter≤250μm);10mm(coated optical fiberdiameter:0.25~3mm)
Fusion splicing consumption(typical value)
0.02dB(SMF);0.01dB(MMF);0.04dB(DSF);0.04dB(NZDSF)
Retum loss Better than 60dB
Fusion splicing time: (typical value)7s
Heating time(typical value) 18s
Pulling force test 1.96~2.25N
Thermal shrinkagetube 60mm,40mm and a series of thermal shrinkage tubes
Graphical display High-performance 4.3 inch lcd
Magnification time 320 times/88 times
Fusion splicing record 10000 groups
Battery capacity 11.1V,6800mAh,typical value offusion splicing and thermal cycle is 330 times
Battery servicelife Cycle charging times reach 300-500,can be replaced by customers
Electrode servicelife Typical value is 4000 times,can be replaced by customers
Construction lighting Built-in lights with high-brightness and wide lighting area
Working environment Temp:-10~50ºC;hum:0~95%RH,height above sealeve1:0~6000m
Operation interfaces GUI graphical operation interfaces
Extemal power AC:AC100~240V,60Hz,0~1.5A,DC:DC10~15v
Extemal port USB/SD
Dimensions 120mm(W)×130mm(H)×154mm(D),(without rubber anti-vibration pad)
Weight 1.59kg(host engine).0.37kg(battery)
