Audited Supplier
XH-432
a Lifetime of Service
3 Years
Sheet Extruder
PP
Extrusion Molding Machine
One Feed
Integral Type Extruder
Single-Screw
Full Intermeshing
Deep Screw
Don't Exhaust
Automatic
Computerized
0.02-0.04mm
38crmoala
33:1 or Customized
35mm or Customized
0-95rpm
380V
Plastic Rubber Materials,Plastic Processing
300mm
Siemens PLC Control
Xihua
Wooden Case
China
8477409000
Product Description
Lab Casting Film Machine (Horizontal) Introduction
Film forming equipment is for the research of polymer materials (plastic, rubber), plastic raw materials, plastic processing and other industries. It can complete the extrusion, blown film, sheeting, casting, stretching, composite molding processing experiments together. The process is complete, the function is extended and powerful, the operation is simple and convenient. It is the best experimental equipment for the rubber and plastics industry.
The material is put into the hopper, through plasticizing and extruding of the extruding device the material become cast state, and goes out through the die head, then rolled by the two-roll calender.
Other type cast film machine
1. lab cast film machine with twin screw extruder.
2. Multiple layers lab cast film machine, Like Two, Three, Five layers cast film machine.
3. lab cast film machine with Vertical die.
Film forming equipment is for the research of polymer materials (plastic, rubber), plastic raw materials, plastic processing and other industries. It can complete the extrusion, blown film, sheeting, casting, stretching, composite molding processing experiments together. The process is complete, the function is extended and powerful, the operation is simple and convenient. It is the best experimental equipment for the rubber and plastics industry.
The material is put into the hopper, through plasticizing and extruding of the extruding device the material become cast state, and goes out through the die head, then rolled by the two-roll calender.
| SPECIFICATIONS FOR 25 TON CRAWLER EXCAVATOR | |
| Applicable materials | PP, PE, PVC, PS, PET, etc. |
| Screw diameters | 35mm |
| Screw rotating speed | 0-95 rpm (adjustable) |
| Screw L/D ratio | 33:1 |
| Temperature range | Room temperature - 300ºC |
| Film thickness | 0.02-0.04mm |
| Film width | 250mm (customized) |
| Die width | 300 mm |
| Working voltage | 380V/50Hz/3 phases or Customerized |
| Motor power | 2.2kw |
| Total Power | 7 kw |
| Control mode | SIEMENS PLC Control |
Features
1) Adopting international brand variable speed control motor for the extruder to make the plasticization stable and constant
2) Using brand melt pressure and temperature sensor to ensure high accurage data
3) Cantilever roll structure making it easy to lead the film and be operated
4) dopting PLC control system and friendly operation interface to easily operate
5) On-line testing and displaying melt pressure, temperature and other key data
6) Emergency stops and devices to protect safety of the operator
Other type cast film machine
1. lab cast film machine with twin screw extruder.
2. Multiple layers lab cast film machine, Like Two, Three, Five layers cast film machine.
3. lab cast film machine with Vertical die.
