Audited Supplier
Switchgear
Cabinet
ISO9001:2000, CE
Low Voltage
Power Distribution
Steel Plate
IP30
380VAC/Customized
660/1000VAC
630-5000A
800-2000A
Steel Plate
ISO9001/CE
Simoer
Wooden Case/Pallet
China
8537209000
Product Description
MNS Power Distribution Switchgear Electricity Equipment
CE/ISO9001 certificates
Customized available
CE/ISO9001 certificates
Customized available
1) MNS low voltage withdrawable switchgear is manufactured by standard module through consulting MNS series low voltage switch cabinet of Switzerland ABB Co-mpany, and synthetically improved.
2) The device is applicable to the system with AC 50Hz, rated working voltage 660V and below, used as control device for various power generation, transmission, distribution, power transfer and power consumption device.
3) It is widely used in low voltage distribution system of various mining enterprise,tall building and hotel,municipal construction etc. 4) Besides the general land use,after special disposal,it also can be used for marine petrol drill taken platform and nuclear power station.
2) The device is applicable to the system with AC 50Hz, rated working voltage 660V and below, used as control device for various power generation, transmission, distribution, power transfer and power consumption device.
3) It is widely used in low voltage distribution system of various mining enterprise,tall building and hotel,municipal construction etc. 4) Besides the general land use,after special disposal,it also can be used for marine petrol drill taken platform and nuclear power station.
5) The device accords with international standard IEC439-1 and national standard GB7251.1.
Use Environmental Conditions
Use Environmental Conditions
1) Ambient air temperature: -5ºC ~+40ºC and the average temperature should not exceed +35ºC in 24h.
2) Air condition: With clean air. Relative humidity should not exceed 50% at +40 ºC. Higher relative humidity is allowed at lower temperature. Ex. 90% at +20ºC. But in view of the temperature change, it is possible that moderate dews will produce casually.
3) Altitude above sea level should not exceed 2000M.4) The device is suitable to the transportation and store with following temperature :-25 ºC ~+55 ºC,in short time (within 24h) it reaches +70 ºC . Under
the limiting temperature,device should not suffer damage that can't recover and it can works normally under normal conditions.
5) If the above operating conditions not meet user's demand. Consult with manufactory.
6) Technical agreement should be signed additionally if the device is used for marine petrol drill taken platform and nuclear power station.
| Rated Working Voltage(V) | Rated Insulation Voltage(V) | Rated Working Current(A) | Rated Short Time Withstand Current Virtual Value(1s)/Peak Value(kA) | Protect Grade of Shell(IP30/40) | ||
| Horizontal Busbar | Vertical Busbar | Horizontal Busbar | Vertical Busbar | Outline Dimension | ||
| 380/660 | 660/1000 | 630-5000 | 800-2000 | 50-100/105-250 | 60/130-150 | 2200×600(800/1000)×800(1000) |
| Rated working current of vertical busbar: Draw-out type with single side or double sides operation:800A.MCC with 1000mm depth and single operation:800-2000A | ||||||
Modular C-profiles are used to form various cabinet frame structures and drawer units that meet various needs through connectors. High strength flame-retardant engineering plastic components are widely used in MCC cabinets to make their safety more reliable. In addition, foreign functional boards have been modified to combine 200mm modules to better meet the design requirements of PC cabinets and MCC cabinets. The extraction unit and cabinet have reliable interlocking devices to prevent load tripping when the switch is powered on, improving their safety. In addition, the cabinet is generally assembled by processing cold-rolled steel plates, or aluminum zinc coated steel plates can be used according to different user needs.
1) Type of switchgear:
A: Power receiving and busbar cabinet
B: Power Center Cabinet (PC)
1) Type of switchgear:
A: Power receiving and busbar cabinet
B: Power Center Cabinet (PC)
C: We use internationally renowned brand framework circuit breakers such as Emax2 (ABB) and MT (Schneider) series circuit breakers for power distribution.
D: Motor Control Center Cabinet (MCC): assembled from drawers of various sizes, the main switches of each circuit adopt high breaking capacity plastic case
circuit breakers or rotary load switches with fuses.
2) Reactive power compensation cabinet
There are five sizes designed with a modular structure at a height of 8E (200mm), with an effective component installation height of 1800mm, making the overall layout of the cabinet more reasonable and aesthetically pleasing.
Q1: Are you a factory or trading company
A1: We are a factory, we can guarantee our price is first-hand, very cheap and competitive.
Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.
Q3: When can I get the price?
A3: Usually we quote within 12 hours after we get your inquiry.
Q4: What is the price of shipping?
A4: Depending upon the port of delivery, prices vary.
