Audited Supplier
1. Portable Buildings
Port Container Services have a large range of portable buildings available that can be delivered all over the world wide. Our multi-purpose portable buildings can be used as site offices, accommodation units, lunch rooms, first aid rooms and even workshops. By combining a variety of the above portable buildings, you can create the complete worksite solution to ensure your construction site is operating at its most productive capability. Our portable buildings are easily transported and can be easily moved to the next job site where needed. We can also custom design and construct a portable building to suit your needs or choose from our large range of portable buildings in numerous sizes and layouts available straight off the plan. We have a wide range of portable building accessories available that our container technicians can install upon request.
2. Wide application of our flat pack/modified container house:
(1) Office
(2) Mining camp/labor camp
(3) Hotel or Motel
(4) Workers' accommodation
(5) School
(6) Canteen
(7) Villa
(8) Apartment
(9) Public toilet or shower
(10) Clinic
(11) Disaster relief
| Specification | L*W*H(mm) | External dimensions:6055*2990*2896 Inside dimension:5875*2810*2590 | ||||||||||
| Roof form | Flat roof, organized drainage through 4 pillars (gutter section 40mm*80mm) | |||||||||||
| Number of floors | ≤3 floors | |||||||||||
| Design parameter | Structure design service life | 20 years | ||||||||||
| Ground live load | 2.0KN/m² | |||||||||||
| Roof live load | 0.5KN/m² | |||||||||||
| Wind load | 0.6KN/m² | |||||||||||
| Seismic fortification intensity | 8 degrees | |||||||||||
| Structure | Pillar | Specification: 210*150mm, galvanized cold rolled section steel, t=2.3mm (bare steel), material SGC440 | ||||||||||
| Corner fitting | Top corner: length 210mm* width 150mm* height 200mm, bottom corner: length 210mm* width 150mm* height 165mm | |||||||||||
| Main roof beam | Specification: 180mm, pressed steel, galvanized cold rolled section, t=2.0mm (bare steel), material SGC440 | |||||||||||
| Floor girder | Specification: 160mm, pressed steel, galvanized cold rolled section, t=2.3mm (bare steel) material SGC440 | |||||||||||
| Roof secondary beam | Specification: C100*40*12*2.0, cold-formed thin-wall C-type steel, t=1.2mm, material Q345B | |||||||||||
| Ground subbeam | Specification: 120*50*2.0, "π" font pressed steel, t=1.1mm, material Q345B | |||||||||||
| Paint | Powder electrostatic spraying paint ≥80μm | |||||||||||
| Roofing | Roof panel | 0.426mm thick aluminum plated zinc color steel plate, color white gray | ||||||||||
| Thermal insulation cotton | 80mm thick glass wool felt with aluminum foil on one side, bulk weight ≥14kg/m³, combustion performance is class A non-combustible | |||||||||||
| Ceiling board | 0.426mm thick pressure type aluminum plated zinc color steel plate, hidden nails, color white gray | |||||||||||
