Audited Supplier
PAM
CCIC
Yes
Yellow
Powder
Fracturing Fluid
Composite Additive
ENERGY
1ton
25kg/bag
China
Product Description
Gelling Agent Carboxy Methyl Hydroxy Propyl Guar CMHPG for batch mixing in guar-based fracturing fluids. Addition of appropriate crosslinker and stabilizer converts it to the corresponding highly viscous gel fracturing fluid. Its hydration rate is designed for ease of mixing without lumping. It will disperse and hydrate in water at temperatures as low as 356 degF.
Chemical Properties and Application
Carboxy Methyl Hydroxy Propyl Guar CMHPG can be used to prepare guar-based fracturing fluids in batch mixing. The fluid application temperature ranges from 80 to 356 degF. It can be mixed with freshwater and salt water, depending on the application requirement.
Together with crosslinker, activator and the delaying agent, the gelling agent provides wide range of delay time and rheological property at high temperature and pressure. The delay time can vary from 0~6 minutes.
| Guar-Based Frac Fluid Typical Properties | ||||
| Properties | Low-temperature 30˚ C~60˚ C | Mid-temperature 60˚ C~120˚ C | High-temperature 120˚ C~180˚ C | |
| Specific Gravity ,g/cm3 | 1.01~1.02 | |||
| Cross-linking time, s (seconds) | 30~240 | 40~360 | 120~600 | |
| Shear Stability | Shear time, min | 120 | 120 | 120 |
| Apparent Viscosity, mPa•s | ≥ 180 | ≥ 130 | ≥ 110 | |
| Statistic Fluid-loss Coefficient, m/min0.5 | ≤ 4×10-4 | |||
| Gel Break Fluid Viscosity, mPa•s | ≤ 3.0 | |||
| Gel Break Fluid Surface Tension, mN/m | ≤ 22.0 | |||
| Interfacial Tension, mN/m | ≤ 1.0 | |||
| Residue Content, mg/L | ≤ 260 | ≤ 415 | ≤ 490 | |
| Core Permeability Damage % (with breakers) | ≤ 18% | |||
