Audited Supplier
SE
160875-66-1
C5h6si
000000000004088678
Dyestuff Intermediates
Liquid
Industrial
Colorless
Dow Chemical, Eastman
15 Days
Smooth and Silky for Textiles
Softener in Textile Finish Formulations
Mould Release of Technical Rubber, Tyres, Plastics
Water Repellent and Release Agent for Industrial G
Additive in Maintenance Products: Floor and Furnit
xiameter
200kg/Drum
99%
Origin
34039100
Product Description
DOWSIL™ 1349 Emulsion is a 60% actives non-ionic emulsion formulated with a polydimethylsiloxane. Because of its non-ionic nature, it can be used in a variety of systems, such as non-ionic, anionic, cationic surfactant or polymer systems without forming a
complex. Extensive testing has shown that DOWSIL™ 1349 Emulsion offers good dilution
stability at 20% solids.
| Test | Unit | result |
| Appearance | Milky-white emulsion | |
Nonvolatile content | % | 62-66 |
| PH | 7.0-9.5 | |
| Emulsifier type | Non-ionic |
Applications
*** As ingredient in polishes, DOWSIL™ 1349 Emulsion is used to provide good gloss with
minimum smear in both car and furniture polish formulations
*** Mould release of: Rubber or plastic parts (stoppers, screw tops, bungs, etc.)
*** Lubrication of: Extruded rubber parts; conveyor belts
*** Textile lubricant and fuzzing agent
*** Surface treatment of Titanium dioxide
Benefits
***Ready to use non-ionic emulsion
*** Provides gloss and water repellency
*** Good wetting and slip characteristics
*** General purpose release agent including web release
*** Imparts softening and lubrication to textiles
Does not contain alkylphenolethoxylates (APEO)
*** Good emulsion stability up to 50°C
*** Good dilution stability up to 2% in water
*** High solid content and provides low cost-in-use
How to Use
DOWSIL™ 1349 Emulsion can be used as received or in a diluted form. For use as
release/lubricant DOWSIL™ 1349 Emulsion may be applied as received in a diluted form by
the conventional methods of spraying, dipping, wiping or brushing. Low hardness water
should be used for dilution. A typical dilution is DOWSIL™ 1349 Emulsion (1 part w/w) to
water (20 parts w/w) but the user should determine the best concentration and application
method on a small scale before production. For use as fabric finish agent DOWSIL™ 1349
Emulsion can be applied to fabric by padding. The amount of emulsion required will depend
on the fabric constructions and type of fabric used (natural, synthetic). Generally, between
6 g/1 and 25 g/1 bath concentration is recommended.
Contact us for further details.Packaging Information
DOWSIL™ 1349 Emulsion is available in 20 kg pails and 200 kg drums.
