Audited Supplier
NDPJ-RBHQ-5
Electric Type
High-Speed Circuit Breaker
Circuit Breaker
Prevent Motors From Damage
CCC
as Per Customer's Drawing
Customized
Customized
Variety of Application
Away From Other Humid Material
NIDE
Pallet Suitable for Sea Transportation
customized
China
8545200000
Product Description
8AMC series thermal protector is an automatic temperature recovery device. It is installed in series with the motor coil. Therefore, the thermal protector will respond to the temperature change and motor current. The heat caused by temperature and current raise will transmit to bimetallic element. Once the preset temperature is reached, the bimetallic element will react and make contactor cut off. Then the circuit will be cut off. Once the motor temperature decreases to the rated recovery temperature, bimetallic element will recover to the initial station. Then the contactor will close and the circuit will reconnect.
Temperature specification
Open temperature: 80~160±5ºC, one gear per 5ºC
Reset temperature: it is 2/3 of standard opening temperature or specified by customers. The tolerance is 20ºC.
Contact capacity
They are applicable for more than 5000 cycles under following condition.
Notice:
The thermal protector can not sustain heavy impact during working.
The word side is the temperature sensing surface.
Information needed for thermal protector inquiry
It will be better if customer could send us detailed drawing including below information.
1. Thermal protector dimension: length, height, width, tolerance, lead wire length.
2. Thermal protector open temperature
3. Thermal protector recovery temperature
4. Thermal protector applications
5. Required quantity
6. Other technical requirement.
Temperature specification
Open temperature: 80~160±5ºC, one gear per 5ºC
Reset temperature: it is 2/3 of standard opening temperature or specified by customers. The tolerance is 20ºC.
Contact capacity
They are applicable for more than 5000 cycles under following condition.
| Voltage | 24V-DC | 125V-AC | 250V-AC |
| Current | 50A | 50A | 25A |
Notice:
The thermal protector can not sustain heavy impact during working.
The word side is the temperature sensing surface.
Information needed for thermal protector inquiry
It will be better if customer could send us detailed drawing including below information.
1. Thermal protector dimension: length, height, width, tolerance, lead wire length.
2. Thermal protector open temperature
3. Thermal protector recovery temperature
4. Thermal protector applications
5. Required quantity
6. Other technical requirement.
