Audited Supplier
1.Working Principle
The winch sensor is installed on the winch shaft to monitor the angular displacement caused by the rotation of the winch shaft during the whole drilling process. Through calculation, the change of hook height during drilling can be obtained, and the current drilling depth can be obtained.
CNPS-DW-A11 winch sensor is equipped with two photoelectric switches and a piece of shield with teeth. When the shield rotates with the winch shaft, the infrared light in the gap between the two photoelectric switches in the sensor is blocked or turned on, and two sets of corresponding electrical pulse signals are sent to the instrument after recognition and processing. The corresponding direction and variation of angular displacement can be obtained.
2.Technical Indicators
Working voltage: 5V DC
Output level: high level 5V; low level 0V.
Working temperature: - 40 C ~ 80 C
Power consumption: 250MW
Response time: 150 S
| capacity | Kg | 1~20Kg |
| Rated Output | mv/v | 1.0±0.15 |
| Non-linearity | %F.S | 0.05%F.S |
| Hysteresis | %F.S | 0.05 |
| Repeatability | %F.S | 0.05 |
| Creep | %F.S/3min | 0.05 |
| Temp.effect on zero | %F.S/10ºC | 0.05%F.S |
| Temp.effect on span | %F.S/10ºC | 0.05%F.S |
| Zero balance | mv/v | ±0.05 |
| Input impedance | Ω | 1000±6 |
| Output impedance | Ω | 1000±5 |
| Insulation resistance | MΩ | ≥2000(100VDC) |
| Recommended excitation voltage | VDC | 3~10 |
| Allowed excitation voltage | VDC | 3~12 |
| Compensated temp.Range | ºC | -10ºC~+40ºC |
| Operating temp.Range | ºC | 0ºC~+40ºC |
| Safe overload | %F.S | 120 |
| Ultimate Overload | %F.S | 150 |
| Connection | Excitation: Red:+ Black:- | |
| Signal: Green:+ White:- | ||
FAQ
Q: Are you trading company or manufacturer ?
A: As customer's request ( For example: FLANGE DN20, MOQ 500KGS).
A:Sure, Our sample is provided free of charge, but not including courier fees.
A: Payment<=5000USD, 100% in advance. Payment>=5000USD
