Multi Frequency Remote ControlPROGRAMMING: 1.Hold button 1 and press button 2 four times ,then
release both buttons, the led of FY-DPBF emits a quick
flash every 2 sec.
2.Place and press the original remote control in front of
the remote , at about 2-3 cm of distance,until the led of
FY-DPBF starts flash quickly.
3.While the LED of FY-DPBF is flashing, press the
button of the FY-DPBF where you want to store ,the
remote'code just copied, until the led will turn off. Note:
To duplicate a second button, repeat the operation from
the point 1. Automatic matching code:
Hold on pressing press the button you want to match
code. until the receiver emitt the code ,the led of the
remote flash quickly ,then release the button ,the
remote's code has matched successfully . Emitting seed code:
Pressing the button 1 and button 2 at the same time
until LED flashes quickly . Release two buttons .press
the button that you want to emit seed code , it has
emitted seed code successfully .