Audited Supplier
Production Description:
A plate heat exchanger consists of a set of corrugated metal plates with four corner holes through which two kinds of heat transfer liquid pass. The sheet metal is mounted in a frame with fixed plates on the sides and movable compression plates, and is clamped with clamping bolts. A sealing gasket is provided on the plate to seal the fluid channel and guide the fluid to flow alternately to the respective flow channel to form heat exchange. The flow rate, physical properties, pressure drop, and temperature difference of the fluid determine the number and size of the plates. The corrugated plate not only increases the turbulence level, but also forms many supporting points, which are sufficient to withstand the pressure difference between the media. The metal plate and movable plate compaction plate are suspended from the upper guide bar and positioned by the lower guide bar, while the rod end is fixed on the support column.
Features:
1.Plate heat exchanger is made of polymer synthetic fiber by special process, with high moisture permeability, good air tightness, tear resistance, aging resistance and other characteristics;
2.The energy saving effect of the plate heat exchanger products has reached the advanced level abroad, with long service life and good temperature conductivity. It is suitable for the areas with large indoor and outdoor temperature difference and small humidity difference;
3.Plate heat exchanger can be configured according to the requirements of users heating, refrigeration, humidification, purification, noise reduction and other different functional sections;
4.Plate heat exchangers are usually made of stainless steel (SUS 304, SUS316), titanium alloy brazed at high temperature in vacuum, or combined with seal ring bolt lock;
5.Plate heat exchanger forms a compact plate heat exchanger capable of withstanding continuous high temperature and high pressure operation;
Application Area:
1.Refrigeration: used as a condenser and evaporator;
2.Hvac: intermediate heat exchangers used with boilers, intermediate heat exchangers in high-rise buildings, etc;
3.Chemical industry: soda ash industry, synthetic ammonia, alcohol fermentation, resin synthesis cooling, etc;
4.Metallurgy industry: aluminate mother liquor heating or cooling, steelmaking process cooling, etc;
5.Machinery industry: all kinds of quenching liquid cooling, reducer lubricating oil cooling, etc;
6.Power industry: high voltage transformer oil cooling, generator bearing oil cooling, etc;
7.Paper industry: bleaching process heat recovery, heating wash slurry, etc;
8.Textile industry: alkali solution cooling viscose silk, boiling nitrocelluget cooling, etc;
9.Food industry: juice sterilization cooling, animal and vegetable oil heating cooling, etc;
10.Grease process: soap - based normal pressure drying, heating or cooling liquid for various processes;
11.Central heating: Thermal power plant waste heat district heating, heating bath water;
12.Others: petroleum, medicine, ships, seawater desalination, geothermal utilization.
HCH
