Audited Supplier
TD711
Incandescent
Concrete
Modern
E27
Electric
on-off
CE, UL cUL
Without Light Source
Factory
Ivory
Round Shape
Fabric
Dry Location
CFL Bulb
100W
Black Cord in 6 Feets
Mail Order Package
21*19*65.5 inch
China
9405290090
Product Description
| Item No. | TD711 |
| Product Size | 17*17*29" |
| Shade Size | 12/17*12/17*11'' |
| Carton Size | 26.375 * 13.75 * 19.75'' ( 1 * 1 pack ) |
| N.W | 7.3KG |
| G.W | 8.8KG |
| Material | Concrete |
Important safety instructions:
- Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance's plug.
- Ground fault circuit interrupter(gfci) protection is to be provided on the circuit or outlet to be used for the wet location portable luminaire, receptacles are available having built-in gfci protection and are able to be used for this measure for this measure or safety.
- Use only with an extension cord for outdoor use, such as an extension cord of cord type sw,sw-a,sow,sow-a, stw, stw-a, stow, stow-a, sjw, sjw-a, sjow, sjow-a, sjtw, sjtw-a or sjtow, sjtow-a.
Bulb Replacement
- Before replacing the bulb, be sure that the glass dome and bulb are cool and lamp is unplugged
- Unscrew glass dome and existing bulb from socket, replace with a new bulb, then recover the glass dome, plug power supply cord back into outlet.
Care and Cleaning
- Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
- Wash the shade with a soft brush and mild detergent ( such as dish-washing soap) and then thoroughly rinsed.
| Problem | Possible Cause | Solution |
| The bulb will no light | - This bulb is burned out | - Replace the light bulb |
| - The power is off | - Ensure that the power supply is turned on | |
| - Did not insert plug into power outlet | - Ensure that the plug is fully and properly inserted into the power outlet | |
| - The circuit breaker is off | -Ensure that the circuit breaker is et in the on position | |
| The fuse blows or a circuit breaker trips when the light is turned on | - There is an exposed wire | - Discontinue use of the lamp. |
| - There are too many items on one circuit | - Contact a qualified electrician or call the related Customer Service Team | |
| - Uplug other items on the circuit |
