Audited Supplier
LPG
Maide
Product Description
DB-65 pumps are side channel, multicellular, self-priming pumps designed with 6 stages, having a horizontal configuration and offering numerous metallurgical variants.
Shaft sealing by mechanical seal without cooling. The use of a pre-compression
Turbine at the suction end makes it possible to obtain a very small required
NPSH, so that this pump can be used under very difficult suction conditions.
Direction of rotation: Anti-clockwise facing the end of the pump drive shaft
RP: 40 bars
Max. Pressure: 40 bars at 120C
Speed: 1450 rpm
Power: 380V, 50Hz, 4KW
Ambient Temperature: -20ºC -+ 60ºC.
Number of stages: 6
Connecting flanges: As per DIN 2501, PN 40
Bearings: Sleeve bearing at the pump end, ball bearing at the drive end
Lubrication: 1 plain bearing at the pump end lubricated by the pumped product, 1
Ball bearing at the drive end lubricated for life.
Shaft sealing by mechanical seal without cooling. The use of a pre-compression
Turbine at the suction end makes it possible to obtain a very small required
NPSH, so that this pump can be used under very difficult suction conditions.
Direction of rotation: Anti-clockwise facing the end of the pump drive shaft
RP: 40 bars
Max. Pressure: 40 bars at 120C
Speed: 1450 rpm
Power: 380V, 50Hz, 4KW
Ambient Temperature: -20ºC -+ 60ºC.
Number of stages: 6
Connecting flanges: As per DIN 2501, PN 40
Bearings: Sleeve bearing at the pump end, ball bearing at the drive end
Lubrication: 1 plain bearing at the pump end lubricated by the pumped product, 1
Ball bearing at the drive end lubricated for life.
