Audited Supplier
LMPG
Wire & Cable Protection
Red Green Yellow Blue Black
Flexible
70
Polyethylene
10.4MPa
ID12mm~200mm
2:1
Optical Cable
Insulation Sleeve & Tube
ISO9001
Feibo
Feibo
Carton
12MM-200MM
Suzhou
3917390000
Product Description
Heat shrinkable tubing
Material: Polyolefin
Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)
Operating Temperature: -55°C to +125°C
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +110°C
Maximum Tensile Strength: 10.4 Mpa
The heat-shrinkable busbar protection sleeve is made of special polyolefin and is specially processed to have extremely high insulation properties. The heat-shrinkable busbar protective sleeve is made of special polyolefin and is specially processed to have extremely high insulation properties. Heat shrinkable busbar protection sleeves are divided into 1KV heat shrinkable busbar protection sleeves, 10KV heat shrinkable busbar protection sleeves, 35KV heat shrinkable busbar protection sleeves, heat shrinkable busbar protection sleeves are used for substation busbars, high and low voltage The insulation protection of the switch cabinet busbar can compact the structure of the switch cabinet (shorten the distance between phases) and prevent occasional short circuit accidents.
Mainly used for wire connection, solder joint protection, wire end harness, electronic device protection and insulation treatment, parts and metal surface protection, related product rust prevention, anti-corrosion treatment, wire and other product identification.
Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)
Operating Temperature: -55°C to +125°C
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +110°C
Maximum Tensile Strength: 10.4 Mpa
The heat-shrinkable busbar protection sleeve is made of special polyolefin and is specially processed to have extremely high insulation properties. The heat-shrinkable busbar protective sleeve is made of special polyolefin and is specially processed to have extremely high insulation properties. Heat shrinkable busbar protection sleeves are divided into 1KV heat shrinkable busbar protection sleeves, 10KV heat shrinkable busbar protection sleeves, 35KV heat shrinkable busbar protection sleeves, heat shrinkable busbar protection sleeves are used for substation busbars, high and low voltage The insulation protection of the switch cabinet busbar can compact the structure of the switch cabinet (shorten the distance between phases) and prevent occasional short circuit accidents.
Mainly used for wire connection, solder joint protection, wire end harness, electronic device protection and insulation treatment, parts and metal surface protection, related product rust prevention, anti-corrosion treatment, wire and other product identification.
| Diameter | Thickness before shrink(mm) | Thickness after shrink(mm) |
| Φ12 | 0.63 | 1.25 |
| Φ16 | 0.75 | 1.5 |
| Φ20 | 0.80 | 1.6 |
| Φ25 | 0.85 | 1.75 |
| Φ30 | 0.90 | 1.85 |
| Φ40 | 0.98 | 2 |
| Φ50 | 0.98 | 2 |
| Φ60 | 1.05 | 2.1 |
| Φ70 | 1.05 | 2.1 |
| Φ80 | 1.15 | 2.3 |
| Φ90 | 1.15 | 2.3 |
| Φ100 | 1.20 | 2.4 |
| Φ120 | 1.25 | 2.5 |
| Φ150 | 1.25 | 2.5 |
| Φ180 | 1.30 | 2.6 |
| Φ200 | 1.30 | 2.6 |
