Audited Supplier
PP
Melt Blown
Non-Woven Polyester Fiber
The Filter Type
Melt Blown Filter Cartridge
Liquid Filter, Water Filter
PRE Filter
Round Bag
Room Temperature
Vertical Lifting
Polypropylene
OEM
1 Micron \5 Micron\10micron\20micron\etc
5inches\10 Inches\20inches\30inches\40inches
2.5"-4.5"
28mm
4.4degree to 62.8degree
63degree
46.4psi
2-8gpm
OEM
Carton
OEM
Shanghai
84219990
Product Description
PP melt blown water filter cartridge
Made from 100% pure Polypropylene resin, design for the reduction of dirt, rust, and unforeseen particles. Progressively loose structure from inside to outside enhance the cartridge performance.
Feature:
l Thermally self-bonded micro-fiber construction
l Designed for purification and good for food contact
l Graded pore structure enhances dirt holding capacity
l No fiber releasing and media migration
l Wide chemical compatibility
l Spun fibers from a true gradient density from outer to inner surfaces
l High contaminant holding capacity
Application:
l Pre-treatment of drinking water system
l Oil removal industry
l Food and beverages
l Photographic industry
l Pharmacy industry
l Pre-treatment of industrial DI&RO system
l Low viscosity fluids
Specification:
Style surface:
Packaging & Shipping:
Packaging:
1. Products are packed by shrink film. It can reduce abrasion when transport.
2. Products are packed by high quality carton, suitable for long distance ocean freight transportation as well as changing climate and with good resistance to moisture and shocks.
Delivery time:
1. If this kind of products is in stock, the product will be sent for you 1-7days after payment.
2. If this kind of products is not in stock, the products will take about 7-25 days to produce.
Shipping:
Maritime; Railway; Air (DHL/UPS/TNT/FEDEX)
Contacts:
If you have interest in any kind of our product, warmly welcome your inquiry. We will supply our best quality products and service for you.
Made from 100% pure Polypropylene resin, design for the reduction of dirt, rust, and unforeseen particles. Progressively loose structure from inside to outside enhance the cartridge performance.
Feature:
l Thermally self-bonded micro-fiber construction
l Designed for purification and good for food contact
l Graded pore structure enhances dirt holding capacity
l No fiber releasing and media migration
l Wide chemical compatibility
l Spun fibers from a true gradient density from outer to inner surfaces
l High contaminant holding capacity
Application:
l Pre-treatment of drinking water system
l Oil removal industry
l Food and beverages
l Photographic industry
l Pharmacy industry
l Pre-treatment of industrial DI&RO system
l Low viscosity fluids
Specification:
| Micron Rating(μm) | 0.5-100 | |||
| Dimensions | Length(mm) | O.D(mm) | I.D(mm) | |
| Optional | Optional | Optional | ||
| Materials | Media | Core | End Cap | Gasket/O-Ring |
| Polypropylene | Polypropylene | Polypropylene | Silicon | |
| Temperature Range | 4.4ºC to 62.8 ºC | |||
| Max.pressure drop | 20ºC 46.4psi(3.2kg/cm2) | |||
| Maximum flow | 2-8 GPM(depending on micron rating) | |||
Style surface:
Packaging & Shipping:
Packaging:
1. Products are packed by shrink film. It can reduce abrasion when transport.
2. Products are packed by high quality carton, suitable for long distance ocean freight transportation as well as changing climate and with good resistance to moisture and shocks.
Delivery time:
1. If this kind of products is in stock, the product will be sent for you 1-7days after payment.
2. If this kind of products is not in stock, the products will take about 7-25 days to produce.
Shipping:
Maritime; Railway; Air (DHL/UPS/TNT/FEDEX)
Contacts:
If you have interest in any kind of our product, warmly welcome your inquiry. We will supply our best quality products and service for you.
