Audited Supplier
Grinding wheel spindle: 15KW permanent magnet electric spindle
Integral marble bed body
Seal the cover, convenient to adjust the machine, paint, the cover can be removed as a whole, convenient maintenance
The CNC operation panel is installed on the hood, and adopts the mobile hand wheel with magnets for easy operation.
A special high-speed grooved electric spindle, can install one to two pieces of grinding wheel, can be dismantled to the grinding wheel dressing machine to repair the grinding wheel.
Frequency frequency control of spindle motor.
Install pipe sealed oil-proof fluorescent lamp in the machine.
Taiwan SYNTEC SCARL, robot automatic loading and unloading machine independent space installation, increase the service life of the robot.
Guide rail: Japan THK level P
The screw: Japan THK level C3
Servo motor: Taiwan SYNTEC Absolute value CNC system
Robot: Taiwan SYNTEC SCARL (four axis)
PROJECT | UNIT | NZ-03D |
X axis | - | CNC four axes linkage linear axis |
Y axis | - | Imported servo motor drive |
Manual C axis | mm | Left/right rotate 15° |
Quick travel (X/Y/Z/A axis) | mm | 0.0001 |
Minimum diameter for clamping workpiece | mm | 3 |
Maximum diameter for clamping workpiece | - | 16 |
Maximum length for clamping workpiece | - | 150 |
Minimum diameter for grinding workpiece | mm | 1 |
Maximum diameter for grinding workpiece | - | 20 |
Maximum workpiece weight | kg | 5 |
Linear resolution | mm | 0.005 |
Linear repeating positioning accuracy | mm | 0.004 |
Grinding wheel spindle power | kw | 15kw (rated: 3000-8000 rounds) |
Grinding wheel diameter | kg | 75mm(min)~150mm(max) |
Machine weight | kw | About 3000 |
Total power | kw | ≤17.5kw |
