Audited Supplier
Ecoo-G
Aluminum
Offset Printing
CTP Plate
Negative
500, 000 Without Baking
130-150mj/Square Centimeter(830nm)
Light Gray
Any 830nm Laser Platesetter
0.15/0.30mm
Sonora XP/Xtra
EcooGraphix
Standard Export Packing
745x605x0.30(mm)
China
370130
Product Description
Negative Processless Non Chemistry Offset Thermal CTP CTCP Printing Plate
1.Application
EcooGraphix Ecoo-G is a new, environmentally friendly,Development On Press CTP plate . It can be run directly on a printing press after imaging,without a need for chemical processing.
2.Characteristic
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
1.Application
EcooGraphix Ecoo-G is a new, environmentally friendly,Development On Press CTP plate . It can be run directly on a printing press after imaging,without a need for chemical processing.
2.Characteristic
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
| Plate Technical Specification | |
| Model | ECOO-G |
| Plate Type | Non-ablation thermal-negative type |
| Application | High grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm / 0.30mm |
| Spectrum scope | 800-850nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 130~150mJ/m² |
| The period of latent image stabilization | ≤7days |
| Recommended screen method | 1~99 @200Lpi AM/20u FM and mixture |
| The paper number of start-up | <50 sheets |
| Safety Light | 1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light |
| Processing | Without processing,directly on press |
| Run Length | 100,000 impressions,actual run length depends on printing conditions |
| Baking | No recommended |
| Characteristics | |
| Negative non-ablation photosensitive system | |
| Compatible with the dominant devices in the market | |
| Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter | |
| Good dot reproduction,stable performance,wide processing latitude | |
| Long stability of latent image,can be stored at least a week after plate-making | |
| High quality aluminum substrate,professional coating formulation | |
| Application | |
| Suitable for sheet-fed offset press or high speed rotary offset press | |
| Run length:100,000 impressions | |
| Suitable for different types of traditional inks and fountain solutions,including alcohol's substitutes as fountain solutions | |
| Unsuitable to improve run length by baking plates | |
| Transportation and Storage | |
| Packed in seal and stored by means of preventing from light/moisture,over heat and high humidity. | |
| Recommended conditions:18ºC~24ºC,40%~50% RH. | |
