Audited Supplier
BB-PCML13S15A
Silver
SMT
Single-Layer
RoHS, ISO
Customized
New
BMS for Battery
75*55*15mm
Connect Bluetooth to Monitoring The Battery Status
Bb
15A
BB
Standard Carton Package
Li-ion 13S15A BMS
Shenzhen
8534009000
Product Description
New arrival 13S 15A PCB/BMS with bluetooth for lithium battery
Important instructions:
1. Range of application
<350W load
2. Electronic Core requirement
Single Cell Internal Resistance≤35MR.
3. Artcraft Requirement
The whole group cells DC circuit current≥200A(3.6V testing voltage).
4. Temperature requirement
Store Temperature:-25°C~85°C
Working Temperature:-20°C~75°C
5. Other requirement
1) Not allowed to use in cascade
2)For the first time PACK,may cause not discharging,need to charge it to active.
3) Welding order as B-,B1,B2...B+
4)While welding,must use grounding soldering iron.
5)The soldering iron must control as 360~400degree celsius.
6Forbid to use P- as charging port,because while P- used as charging port,the cell group without protection.
7)Must doing well on anti-static,waterproof,dust proof;Well protect the protecting board to avoid striking or extrucsion.
Application Range:
Lithium ion, lithium polymer battery ,etc. Can be rechargeable lithium battery pack
Features:
1)Charger Recognize:When misconnect high voltage charger, charging is prohibited
2)Using time preset:can do preset on time limitation by PC,when reach time limitation turn off output.
3) Recycle time:500 recycle times,then turn off output.
4) Voltage,current,temperature,power,cycles and other data can be read by bluetooth.
5)Bluetooth can read speed power, speed, range, etc. And with overspeed alarm, low battery alarm, range, and other functions
Specification
Connection:
We supply bluetooth bms for silver fish battery, bottle battery, rear rack battery, frog battery, bottle battery and shrink battery packs. Through the bluetooth, you can read the data of the rest capacity, voltage, capacity, current, temperature and so on of the battery pack, which is very convenient to monitoring the battery status.
Important instructions:
1. Range of application
<350W load
2. Electronic Core requirement
Single Cell Internal Resistance≤35MR.
3. Artcraft Requirement
The whole group cells DC circuit current≥200A(3.6V testing voltage).
4. Temperature requirement
Store Temperature:-25°C~85°C
Working Temperature:-20°C~75°C
5. Other requirement
1) Not allowed to use in cascade
2)For the first time PACK,may cause not discharging,need to charge it to active.
3) Welding order as B-,B1,B2...B+
4)While welding,must use grounding soldering iron.
5)The soldering iron must control as 360~400degree celsius.
6Forbid to use P- as charging port,because while P- used as charging port,the cell group without protection.
7)Must doing well on anti-static,waterproof,dust proof;Well protect the protecting board to avoid striking or extrucsion.
Application Range:
Lithium ion, lithium polymer battery ,etc. Can be rechargeable lithium battery pack
Features:
1)Charger Recognize:When misconnect high voltage charger, charging is prohibited
2)Using time preset:can do preset on time limitation by PC,when reach time limitation turn off output.
3) Recycle time:500 recycle times,then turn off output.
4) Voltage,current,temperature,power,cycles and other data can be read by bluetooth.
5)Bluetooth can read speed power, speed, range, etc. And with overspeed alarm, low battery alarm, range, and other functions
Specification
Details | Min. | Typ. | Max | Error | Unit | |||||||||
Battery Gas | 3.7V lithium cell | |||||||||||||
Battery Link | 13S | |||||||||||||
Input Charging Voltage | 54.6 | ±1% | V | |||||||||||
Input Charging Current | <10 | A | ||||||||||||
Output Discharging Voltage | 36.4 | V | ||||||||||||
Continuous Output Discharging Current | ≤15 | A | ||||||||||||
Ambient Condition | Operating Temperature | -25 | 25 | 70 | ºC | |||||||||
Humidity (No Water-Drop) | 0% | 90% | RH | |||||||||||
Storage Condition | Temperature | -40 | 85 | ºC | ||||||||||
Humidity (No Water-Drop) | 0% | 90% | RH | |||||||||||
Protection Parameters (for Individual Cell) | ||||||||||||||
Over-Charge Voltage Protection (OVP) | 4.25 | ±25mV | V | |||||||||||
Over-Charge Voltage Protection Release (OVPR) | 4.10 | ±25mV | V | |||||||||||
Over-Discharge Voltage Protection (UVP) | 2.80 | ±50mV | V | |||||||||||
Over-Discharge Voltage Protection Release (UVPR) | 3.00 | ±50mV | V | |||||||||||
Over-Current Discharge Protection (OCDP) | 40A | Latency | 400mS | |||||||||||
Over-Current Discharge Protection Release | Release load | |||||||||||||
Short circuit current protection | Enable | |||||||||||||
Short circuit current protection delay time | 100 | 300 | ±100 | uS | ||||||||||
Short circuit protection Release | Release load | |||||||||||||
| Temperature protection | High temperature | 75 | external | ±5ºC | Low Temperature | -25 | external | ±5ºC | ºC | |||||
| self-consuming | ≤1000 | uA | ||||||||||||
| dormant self-consuming | ≤100 | uA | ||||||||||||
| (MOS-RDS) Main loop electrify resistance | ≤30 | mΩ | ||||||||||||
| PCBA Size | 75×55×15 | mm | ||||||||||||
Connection:
| P- | The negative terminal of the pack for discharge. | |
| CH- | The negative terminal of the pack for charge. | |
| B- | 1 Connected to the negative terminal of Cell 1. | |
| BC13 | 13 Connected to the positive terminal of Cell 13. | |
| BC12 | 12 Connected to the positive terminal of Cell 12. | |
| BC11 | 11 Connected to the positive terminal of Cell 11. | |
| BC10 | 10 Connected to the positive terminal of Cell 10. | |
| BC9 | 9 Connected to the positive terminal of Cell 9. | |
| BC8 | 8 Connected to the positive terminal of Cell 8. | |
| BC7 | 7 Connected to the positive terminal of Cell 7. | |
| BC6 | 6 Connected to the positive terminal of Cell 6. | |
| BC5 | 5 Connected to the positive terminal of Cell 5. | |
| BC4 | 4 Connected to the positive terminal of Cell 4. | |
| BC3 | 3 Connected to the positive terminal of Cell 3. | |
| BC2 | 2 Connected to the positive terminal of Cell 2. | |
| BC1 | 1 Connected to the positive terminal of Cell 1. | |
| BC0 | 1 Connected to the negative terminal of Cell 1. | |
We supply bluetooth bms for silver fish battery, bottle battery, rear rack battery, frog battery, bottle battery and shrink battery packs. Through the bluetooth, you can read the data of the rest capacity, voltage, capacity, current, temperature and so on of the battery pack, which is very convenient to monitoring the battery status.
