Audited Supplier
Product Description:
| Products name | Promotional Skin Adhesive Surgical Multi Styles Ostomy Pouch Colostomy Bag Supplier |
| Material | High film, non-woven fabric, medical heat-sensitive adhesive |
| Cutting size | 20mm-45mm,20-65mm,20-85mm |
| Certificates | CE ISO |
| Usage | Suitable for stoma patients to collect stoma excrement |
| Trade Terms | FOB/CFR/CIF |
Product Feature:
1.Accurate scale, tailored to the size of the wound
Open pocketThe advantage of opening the pocket is that it is easy to empty, the number of replacements is relatively reduced, and it can be cleaned.
1. Wash the stoma and surrounding skin with warm water and dry it to keep the skin clean and clean. Note: Do not use irritating liquids such as alcohol or iodine
2. Measure the size of the stoma with a stoma ruler.
Note: The size of the stoma will change and should be observed regularly
3. According to the size of the measured stoma, cut an opening of a suitable size on the ostomy film. The diameter of the opening is generally 1-2mm larger than the diameter of the stoma.
4. Spray a little skin care powder around the stoma and apply it evenly for a few minutes to remove the excess powder.
Note: Skin care powder can avoid skin problems caused by foreign body impregnation
5. Apply the skin protectant evenly on the skin, and form a colorless and transparent protective film after thousands of years. Note: The smearing area of the protective film should be slightly larger than the area of the chassis glue
6. Apply the leak-proof cream around the stoma and smooth it with a wet cotton swab to make the skin and the leak-proof cream form a flat surface.
7. Peel off the protective paper.
8. When installing the bag, seal the tail first, and blow a small amount of air into the bag to prevent the bag wall from sticking.
9. Align the cut hole with the stoma, and press from bottom to top to make it fully adhere to the skin. Place the palm lightly on the ostomy bag for a period of time to transfer heat to the chassis, making it more secure to wear.
10. It is recommended to wear a stoma belt to strengthen the adhesion and sense of security. If necessary, wear a stoma abdominal belt to prevent stoma hernia.
Note: Patients with convex and slightly convex chassis must use a waist belt or abdominal belt
Note: Do not use irritating liquids such as alcohol or iodine
2. Measure the size of the stoma with a stoma ruler.
Note: The size of the stoma will change and should be observed regularly
3. According to the size of the measured stoma, cut an opening of a suitable size on the ostomy film. The diameter of the opening is generally 1-2mm larger than the diameter of the stoma.
4. Spray a little skin care powder around the stoma and apply it evenly for a few minutes to remove the excess powder.
Note: Skin care powder can avoid skin problems caused by foreign body impregnation
5. Apply the skin protectant evenly on the skin, and form a colorless and transparent protective film after thousands of years. Note: The smearing area of the protective film should be slightly larger than the area of the chassis glue
6. Apply the leak-proof cream around the stoma and smooth it with a wet cotton swab to make the skin and the leak-proof cream form a flat surface.
7. Peel off the protective paper.
8. When installing the bag, seal the tail first, and blow a small amount of air into the bag to prevent the bag wall from sticking.
9. Align the cut hole with the stoma, and press from bottom to top to make it fully adhere to the skin. Place the palm lightly on the ostomy bag for a period of time to transfer heat to the chassis, making it more secure to wear.
10. It is recommended to wear a stoma belt to strengthen the adhesion and sense of security. If necessary, wear a stoma abdominal belt to prevent stoma hernia.
Note: Patients with convex and slightly convex chassis must use a waist belt or abdominal belt
Q1: Why choose us?
A1: Professional manufacturing of medical consumables and instruments with 10 years of experience. Excellent, stable quality and best cost performance. Flexible MOQ. suitable for small OEM and ODM business FOC samples, used to pass CE certification ISO9001 ISO13485 Check various payment terms available to ensure timely delivery.
Q2: Can I visit your factory?
A2: Of course, you are warmly welcome to visit us, Please try to contact our sales representative via email or phone first. We will arrange transportation arrangements and the most reasonable plan for you.
Q3: What is your minimum order quantity?
A3: The MOQ for common items is very low. For customized projects, it depends on different requirements.
Q4: Can customized services be provided?
A4: Yes. both OEM and ODM are available. Let me know your thoughts or equirements for the product, we are very suitable for you.
Q5: How long is your delivery time?
A5: Usually 20 to 30 days after the sample is confirmed and the formal PO or deposit is received.mass production can be carried out.
Q6: What are the payment terms you accept?
A6: Multiple choice credit card.wire transfer. letter of credit.
