Audited Supplier
D1002A
Custom ID Card Reader/ IC Card Reader
Mifare, EM
Wiegand
1-5m
Parking, Hospital, Library, Company, Bank, Store
Black/White
125kHz/ 13.56MHz
12V
Plastic
dwell
Case
88x88x20mm
Made in China
Product Description
New design electric security gates 12V rfid tag reader
Features:
Wiegand 26bits/ Wiegand34bits Standard Format Data Output
Less than 0.2 second Response Speed
5-10cm Proximity Range
Ambient Temperature: -25º C to 75º C
Ambient Humidity: 10%-90%
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current
100 Meters Communication Distance
Real Time Data Transfer
With Water-Proof Function
Audiovisual indication: When a registered card is presented to the reader, the red
LED flashes green and the beep sounds.
Package:
100pcs per carton. Carton Size: 43.5*56*23(cm)
Packing List:
1*RFID Reader
Installation Description
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 9V to 16V
Black GND
Green D0
White D1
Yellow BEEP
Blue LED
Grey Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)
Orange Door Bell
Grown Door Bell
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
Releated products connection
| Item model | D1002AB |
| Available frequency | 125khz or 13.56mhz |
| Optional interface | WG 26bits or WG 34bits |
| Working voltage | DC 12V |
| Color | black/ white |
| Water-proof | IP66 |
| Protocol | TCP/IP |
| Mangement | by card |
| Dimension | 88x88x20mm |
| Communication distance | 100m |
Features:
Wiegand 26bits/ Wiegand34bits Standard Format Data Output
Less than 0.2 second Response Speed
5-10cm Proximity Range
Ambient Temperature: -25º C to 75º C
Ambient Humidity: 10%-90%
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current
100 Meters Communication Distance
Real Time Data Transfer
With Water-Proof Function
Audiovisual indication: When a registered card is presented to the reader, the red
LED flashes green and the beep sounds.
Package:
100pcs per carton. Carton Size: 43.5*56*23(cm)
Packing List:
1*RFID Reader
Installation Description
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 9V to 16V
Black GND
Green D0
White D1
Yellow BEEP
Blue LED
Grey Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)
Orange Door Bell
Grown Door Bell
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
Releated products connection
