This equipment's compact design boasts a small turning radius, allowing it to effortlessly navigate and operate within confined spaces.
Showcasing a maximum shotcreting volume of 20m³/h, the UPS-20J exemplifies high shotcreting efficiency and pipe blockage prevention.
Featuring a dual system of diesel and electric power, it ensures seamless construction with the electric mode and reliable diesel emergency response, guaranteeing uninterrupted progress.
The machine is optimized and structurally upgraded to offer a low failure rate, high universality of accessories and consumables, and reduced operational costs.
Equipped with wireless remote control functionality, it allows for precise mechanical arm operation, delivering fast, efficient, safe, and energy-saving performance.
Fitted with a substantial 400L accelerator tank, it is perfectly designed to meet the construction volume demands of large sections.
Max mumoveralldimension(L×W×H) | 7830×2000×2520mm |
Self-weight | 12.5t |
Operatingmode | Electric system + diesel engine emergency response system |
Operatingrange(W×H) | 15×8.5m |
Maximumshotcretingvolume | 20m³/h |
Controlmode | The boom adopts wireless remote control |
Chassis model | Self-made engineering vehicle chassis |
Engine | Cum-mins |
Power | 110kW |
Wheelbase | 3540mm |
Maximum travel speed | 17km/h |
Maximum gradeability | 25° |
Minimum outer turning radius | 6301mm |
Minimum inside turning radius | 3768 mm |
Minimum ground clearance | 408mm |
Structural form of boom | Three-section arm two-stage telescopic |
Maximum spray height | 8.5m |
Maximum spray width | 2×7.5m |
Boom pitch angle | -30°~+50° |
Boom slewing angle | 0~270° |
Axial rotation of spray nozzle seat | 360° |
Axial swing of spray nozzle seat | 240° |
Deflection angle brushing of spray nozzle | 8° ×360° continuous |
Total motor power | 45kW |
Number of cylinders | 2 |
Cylinder (cylinder diameter X stroke) | 90mm×800mm |
Concrete cylinder (cylinder diameter × stroke) | 160mm×800mm |
Pumping line | 125-80 reducer pipe |
Maximum size of sprayed aggregate | 25mm |
Maximum pumping volume | 20m³/h |
Hopper capacity | 0.35m³ |
Material receiving height | 1310mm |
Air compressor displacement | 10.5m³/min,45kW |
Working pressure of air compressor | 0.7MPa |
Admixture system displacement | 620L/h |
Admixture system pressure | 1MPa |
Volume of accelerator tank | 400L |