Audited Supplier
ZCS-3000
ISO, CE
With Fan
21.6kg/H
Automatic
5-38 Degrees Celsius
Integral
Multifunction
Fudair
Wooden Case
3000m3/h
Zhejiang, China
84798920
Product Description
| Model | ZCS-3000 |
| Process Airflow(m3/h) | 3000 |
| Reactivation Airflow(m3/h) | 1000 |
| Rated Dehumidification Capacity(kg/h) | 21.6 |
| Reactivation Heating Power(kw) | 18 |
| Process Fan Power(kw) | 3.0 |
| Reactivation Fan Power(kw) | 1.1 |
| Driving Motor Power(kw) | 0.1 |
| Installed Power(kw) | 22.2 |
| Overall Dimension(mm) | 2550*1000*1760 |
| Weight (kg) | 450 |
| Power Supply | 380V/3P/50Hz |
An industrial desiccant rotor dehumidifier is a type of dehumidifier that uses a desiccant material in a rotating wheel or rotor to remove moisture from the air. Here are the key features and workings of an industrial desiccant rotor dehumidifier:
- Desiccant Material:
- The core component is a rotating wheel or rotor coated with a desiccant material, typically silica gel or lithium chloride.
- The desiccant has a high affinity for water molecules, allowing it to absorb moisture from the air.
- Process Air and Reactivation Air:
- The humid process air passes through one section of the rotating desiccant wheel.
- As the wheel rotates, the desiccant in that section becomes saturated with moisture.
- A separate reactivation air stream passes through another section of the wheel, heating and drying out the desiccant material.
- Dehumidification Process:
- The process air passes through the desiccant wheel, where the desiccant material adsorbs the moisture, effectively dehumidifying the air.
- The dry, dehumidified air is then supplied to the target application or space.
- Reactivation:
- The reactivation air stream, typically heated, passes through the desiccant wheel, driving off the absorbed moisture.
- This reactivation process continuously regenerates the desiccant, allowing the dehumidifier to operate continuously.
- Advantages:
- Effective in low-humidity environments where traditional refrigerant-based dehumidifiers struggle.
- Can achieve very low dew points, often down to -40°C (-40°F) or lower.
- Continuous operation without the need for regular desiccant replacement.
- Scalable design for large industrial applications.
