Audited Supplier
tC-05
Dental Orthodontic
Dental Handpiece
Steel
for Dental Use
CAREJOY
Box
1 pcs/pack
China
Product Description
Dental air scaler handpiece
This is 2 Hole version, if you need 4 Hole please leave us a message :)
Feature
1. Brand New; Durable; 100% CE High Quality.
2. One Handpiece Plus 3 Compatible tips: S1 S2 S3.
3. Easily attachable to any 2-hole borden handpiece connector
4. SKU: JK-E-QD(N)-B-B2
Specifications
Available air pressure: 3.2 KG/cm2
Sterilization: High-temperature (135 Degree) and High-pressure repeatedly
Available Air Pressure: 2.5~3.5KG/cm2
Air Pressure: 2.8KG/cm2
Air Volume: 15~24L/Min
Sound Level: 65-68 dB
Net weight: 0.12kg
Gross weight: 0.15kg
Packing size: 170*80*30MM
Caution
1. The air supply must be free of moisture. The water supply must be filtered.
2. Place the most priority of the patients safety
3. Do not exceed 0.28Mpa(2.9kgf/cm2)when setting the air pressure at the dental unit.
4. If any abnormalities are found in use, stop using immediately and contact your dealer.
5. Do not drop, hit, or subject to excessive shocl.
6. Check the vibration, noise and overheating outside of the patient's mouth before initial use. If any abnormalities are found in use, stop using immediatel and contact your dealer.
7. Be sure to stop the air supply, and replace the tip ro the coupling joint.
8. Watch out the sharp point of the tip.
9. Do not use a spray lubricant. Limited air discharge orifice size of the scaler forces the propellant pressure to build up inside, and the scaler may fly off.
10. Do not clean or wipe the scaler with highly oxidized or acid water or strilizing solution.
Installation
1. Holding the tip-end, turn clockwise and fasten securely tighten with wrench.
2. Shout off the water supply. Adjust air pressure to 2.8KG/CM2 Adjust the water flow until a fine mist ejects from the tip.
Lubrication
Supply 2-3 drips into the drive air tube once or twice a day or spray lubricant into inlet hole of handpiece for about two seconds.
Content
scaler handpiece * 1
work tips * 3
Wrench * 1
Feature
1. Brand New; Durable; 100% CE High Quality.
2. One Handpiece Plus 3 Compatible tips: S1 S2 S3.
3. Easily attachable to any 2-hole borden handpiece connector
4. SKU: JK-E-QD(N)-B-B2
Specifications
Available air pressure: 3.2 KG/cm2
Sterilization: High-temperature (135 Degree) and High-pressure repeatedly
Available Air Pressure: 2.5~3.5KG/cm2
Air Pressure: 2.8KG/cm2
Air Volume: 15~24L/Min
Sound Level: 65-68 dB
Net weight: 0.12kg
Gross weight: 0.15kg
Packing size: 170*80*30MM
Caution
1. The air supply must be free of moisture. The water supply must be filtered.
2. Place the most priority of the patients safety
3. Do not exceed 0.28Mpa(2.9kgf/cm2)when setting the air pressure at the dental unit.
4. If any abnormalities are found in use, stop using immediately and contact your dealer.
5. Do not drop, hit, or subject to excessive shocl.
6. Check the vibration, noise and overheating outside of the patient's mouth before initial use. If any abnormalities are found in use, stop using immediatel and contact your dealer.
7. Be sure to stop the air supply, and replace the tip ro the coupling joint.
8. Watch out the sharp point of the tip.
9. Do not use a spray lubricant. Limited air discharge orifice size of the scaler forces the propellant pressure to build up inside, and the scaler may fly off.
10. Do not clean or wipe the scaler with highly oxidized or acid water or strilizing solution.
Installation
1. Holding the tip-end, turn clockwise and fasten securely tighten with wrench.
2. Shout off the water supply. Adjust air pressure to 2.8KG/CM2 Adjust the water flow until a fine mist ejects from the tip.
Lubrication
Supply 2-3 drips into the drive air tube once or twice a day or spray lubricant into inlet hole of handpiece for about two seconds.
Content
scaler handpiece * 1
work tips * 3
Wrench * 1
Payment Terms:
We can accpet the Western Union, Money Gram and Bank Transfer.
Shipment:
1.We will ship your goods out within 5 working days after get your payment.
2.We will send u tracking number soon once we get tracking number.
Shipment:
1.We will ship your goods out within 5 working days after get your payment.
2.We will send u tracking number soon once we get tracking number.
Are you a factory or trading company?
yes, we are manufacturer and seller of dental materials and equipments.
How long is my warranty and what does it cover?
Each warranty period begins at the date of delivery date and ends after 2 years.The warranty varies by option items and manufacturer.All warranty claims will be void due to neglect, lack of maintenance, and/or improper handling.
How can I get the after sevice? How can I get the spare part after one year warranty?
We welcome your chats online (Chat or leave message: After service) or e-mail to us regarding any technical or related questions that you may have. And we will offer some free parts for container order.
