Audited Supplier
MTW series grinding mill called the European mill, which has a number of independent intellectual property rights, featured by small occupation area, low consumption, high yield, good appearance and environmental protection. So that it has been extensively used to grind and process materials in metallurgy, building materials and chemistry industries. European mill is widely applied to process non-inflammable and none-explosive materials with Mohs hardness less than 9.3 and humidity under 6%.
Working process of European version mill: the center axis is driven to rotate by the bevel gear and the upper axis end connects with grinding roller hanger where the grinding roller device is placed forming a swinging fulcrum. The grinding roller not only rotates around the central axis but also around the grinding ring, at the same time the grinding roller rotates itself by friction. The blades are placed under the hanger and are in the lower grinding roller end. The rotation of blades and grinding rollers throws materials up to the gap between grinding ring and rollers forming bedding layer which are ground by outward centrifugal force (extrusion force) from grinding roller rotation.
1.Adopting bevel gear integral drive-system achieves.Lower energy energy loss and higher efficiency than traditional mill.
2.Internal thin oil lubrication system. The lubrication resistance is less than that of grease lubrication. make the operation more convenient reliable.
3. Arc air channel guarantees small loss of the air volume and good material flow.and it not easy to block material.
4. Cambered shovel with renewable edge.the effective grinding area is increased,the grinding is more uniform,and the capacity is increased.
5. Streamlined design of classifier's top cabinet makes resistance greatly reduced.
6.Higher powder grinding efficiency and lower cost.
7. No resistance snail shell (small checking door so that there is not an eddy air flow)
8. Output size is adjustable and controllable the powder selecting efficiency is higher than before.
9.Roller device adopts linkage pressurization which is using the most advanced technology.
10.Elegant appearance.
| Model | No.of Roller(pcs) | Grinding ring diameter(mm) | Input size(mm) | Output fineness(mm) | Capacity(t/h) | host speed(r/min) | Main power(kw) | Dimensions(mm) |
| MTW110 | 4 | 1103 | 25 | 1.6-0.038 | 2.5-6.6 | 130 | 45 | 7610*7385*8205 |
| MTW138 | 4 | 1380 | 35 | 1.6-0.038 | 6.5-15 | 96 | 90 | 9860*8340*10227 |
| MTW178 | 4 | 1750 | 40 | 1.6-0.038 | 11-25 | 75 | 160 | 13500*11500*9500 |
| MTW215 | 5 | 2150 | 50 | 1.6-0.038 | 20-50 | 65 | 280 | 13922*9810*13226 |
| MTW1420 | 4 | 1420 | 30 | 1.6-0.038 | 3-10.5 | 103 | 90 | 10050*8335*9715 |
| MTW1720 | 5 | 1720 | 40 | 1.6-0.038 | 5-18 | 92 | 160 | 13390*7790*8410 |
Pre-sale:
(1) device model choice.
(2) According to customer's special requirements, design and manufacture of products.
(3) training technical personnel for clients.
(4) the company free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and programs.
Sale:
(1) product acceptance.
(2) to help customers develop construction programs.
After-sale:
(1) free to assign a dedicated service personnel, arrived at the scene and guide customers installation.
(2) equipment installation.
(3) on-site training of operators.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay to help customers on-site production of 1 month, until the user satisfaction.
