Audited Supplier
SI-PROFIBUS
Communication
Combination
Linear
Continuous
Automatic Control
RoHS, CCC, ISO: 9001, CE
New
Non-Customized
Profibus
0.01m3
Puple Black
for M700 M701m702
CT NIDEC
Cartons/Wooden Box/Pallet
0.1KG
UK
85049090
Product Description
PROFIBUS-DP (Decentralized Peripheral) interface module enables follower connectivity. It is possible to use more than one SI-PROFIBUS or a combination of SI-PROFIBUS and other option modules to add additional functionality such as extended I/O, gateway functionality, or additional PLC features. CT SI-PROFIBUS Adapter for Unidrive M and Commander C
82400000017500 (SI-PROFIBUS)
Nidec Control Techniques PROFIBUS communications adapter for Unidrive M and Commander C size 2 and above.
The module is designed to be installed in the module slot located under the drive cover. It is not compatible with M100, M101 or frame size 1 drives.
Other Unidrive M modules are available.
Manufacturer part number is 82400000017500, SI-PROFIBUS.
Drive Compatibility
The compatibility table below highlights which Control Techniques drives support this option module
SI-PROFINET-V2 allows the drive to communicate and interface with PROFINET PLCs and networks.
Features include:
Dual 100 BASE-TX RJ45 connectors with support for shielded twisted pair, full-duplex 100 Mbps connectivity with auto crossover correction
Integrated switches allow for use of line networks i.e. daisy chaining
Both ports operate in full duplex mode as a network switch PROFINET Real-time class RT_Class_1 and conformance class A
Cycle times from 2 ms to 512 ms specified during configuration
Automatic device replacement using the LLDP and DCP protocols
LED indication of network port activity
Up to 64 cyclic I/O module slots (maximum of 32 in and 32 out) configured by network configuration tool and GSDML file Identification and maintenance functions I&M0 to I&M4 supported
82400000017500 (SI-PROFIBUS)
Nidec Control Techniques PROFIBUS communications adapter for Unidrive M and Commander C size 2 and above.
The module is designed to be installed in the module slot located under the drive cover. It is not compatible with M100, M101 or frame size 1 drives.
Other Unidrive M modules are available.
Manufacturer part number is 82400000017500, SI-PROFIBUS.
Drive Compatibility
The compatibility table below highlights which Control Techniques drives support this option module
| Commander | Commander | Unidrive | Unidrive | Unidrive | Digitax |
| C200 | C300 | M400 | M600 | M700 | HD |
| √ | √ | √ | √ | √ | √ |
SI-PROFINET-V2 allows the drive to communicate and interface with PROFINET PLCs and networks.
Features include:
Dual 100 BASE-TX RJ45 connectors with support for shielded twisted pair, full-duplex 100 Mbps connectivity with auto crossover correction
Integrated switches allow for use of line networks i.e. daisy chaining
Both ports operate in full duplex mode as a network switch PROFINET Real-time class RT_Class_1 and conformance class A
Cycle times from 2 ms to 512 ms specified during configuration
Automatic device replacement using the LLDP and DCP protocols
LED indication of network port activity
Up to 64 cyclic I/O module slots (maximum of 32 in and 32 out) configured by network configuration tool and GSDML file Identification and maintenance functions I&M0 to I&M4 supported
