Audited Supplier
LS162A
165g(Exclude Batteries)
1%
365nm
550nm
1400nm
4*Aaaa Alkaline Battery
+/-2%(Colorless and Transparent Material)
21*13*6cm/Box
Silver, White, Black Ect
Solar Film Vlt, IR, UV Testing
ALILULA, New Vision
One Piece One Small Box
120mm*75mm*25mm(L*H*W)
Guangzhou, China
9030849000
Product Description
No Manual Adjustment Solar Film Meter Transmission Tester ( Ls162A )
LS162A Solar Film Transmission Meter is a small size, portable product for transmission value measurement. It is able to simultaneously measure and display UV, VL and IR transmission values. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need power on the meter and put the testing sample in the opening. The resulting performance data appear on the display.
Product Specification:
Operation:
1.Power on: When LS162A is off, press the "ON/Hold" key.
2.Power off: Press "ON/Hold" key and hold for longer than 3 seconds, LS162A will be powered off.
3.Auto off: No key is pressed in 3 minutes, and then LS162A will power off automatically.
4.Manual hold: If "ON/Hold" key is short pressed during measure status, transmission value will hold on the LCD, "Hold" symbol is displayed on the LCD.Press the "NO/Hold" key again will
release the "Hold" mode. When backing is off, press the "NO/Hold" key turn on the backlight.
5.Measurement: When the meter displays 100% for each value, insert the testing sample in the
" OPENING", VL, UV and IR transmission value will display simultaneously.
Feature:
1. UV transmission meter, IR transmission meter, Light Transmittance Meter, Three function in
ONE device.
2. Small size, portable product for transmission value measurement.
3. Simple operation, putting the testing sample in the "OPENING", UV, Visible and Infrared transmission values of the sample will simultaneously display.
4. Using for window film, solar film and other transparence material testing. Test any sample thickness up to 8mm.
Note:
1. When battery symbol is empty and flash, pls replace the battery.
2. Keep the " OPENING" is empty before turn on LS162A. Otherwise LS162A will display testing interface, turn off and empty the " OPENING" and turn on again.
3.+/-2% Accuracy is for Colorless and transparent material, for colorful or optical coating product
ect, it will be low accuracy.
4. When not use for a long time(e.g several months), please take the battery out.
5. Avoid contact with corrosive agents and prevent from high temperature and high humidity environment.
Service:
1. The meter has one-year warranty. If the meter works abnormally, please send the whole meter
to the company for maintenance.
2. Provide users with spare parts and lifelong maintenance service.
3. Provide the users with the meter inspection service for free.
4. Free technical support for long term.
Welcome to visit our company
GuangDong New Vision Film Co.,Ltd. is a professional manufacturer of car tint film,building film,safety film ect. Our Company is in Guangzhou,factory in Jiangmen city.We offer high
quality products to our customers from all over the world in competitive price.
Certification
We have passed SGS, CE, ROHS, ISO etc test, the products are deserving of your try.
Contact Information
LS162A Solar Film Transmission Meter is a small size, portable product for transmission value measurement. It is able to simultaneously measure and display UV, VL and IR transmission values. This meter is self-contained light sources and self-calibration. No manual adjustment is needed. The users only need power on the meter and put the testing sample in the opening. The resulting performance data appear on the display.
Product Specification:
| Product Item | No Manual Adjustment Solar Film Meter Transmission Tester ( Ls162A ) |
| Product Size | 120mm*75mm*25mm(L*H*W) |
| Weight | 165g |
| Thickness of testing sample | <8mm |
| Resolution | 1% |
| Resolution | +/-2%(Colorless and transparent material) |
| UV peak wavelength | 365nm |
| VL peak wavelength | 550nm |
| IR peak wavelength | 1400nm |
| Power supply | 4*AAAA alkaline battery |
Operation:
1.Power on: When LS162A is off, press the "ON/Hold" key.
2.Power off: Press "ON/Hold" key and hold for longer than 3 seconds, LS162A will be powered off.
3.Auto off: No key is pressed in 3 minutes, and then LS162A will power off automatically.
4.Manual hold: If "ON/Hold" key is short pressed during measure status, transmission value will hold on the LCD, "Hold" symbol is displayed on the LCD.Press the "NO/Hold" key again will
release the "Hold" mode. When backing is off, press the "NO/Hold" key turn on the backlight.
5.Measurement: When the meter displays 100% for each value, insert the testing sample in the
" OPENING", VL, UV and IR transmission value will display simultaneously.
Feature:
1. UV transmission meter, IR transmission meter, Light Transmittance Meter, Three function in
ONE device.
2. Small size, portable product for transmission value measurement.
3. Simple operation, putting the testing sample in the "OPENING", UV, Visible and Infrared transmission values of the sample will simultaneously display.
4. Using for window film, solar film and other transparence material testing. Test any sample thickness up to 8mm.
Note:
1. When battery symbol is empty and flash, pls replace the battery.
2. Keep the " OPENING" is empty before turn on LS162A. Otherwise LS162A will display testing interface, turn off and empty the " OPENING" and turn on again.
3.+/-2% Accuracy is for Colorless and transparent material, for colorful or optical coating product
ect, it will be low accuracy.
4. When not use for a long time(e.g several months), please take the battery out.
5. Avoid contact with corrosive agents and prevent from high temperature and high humidity environment.
Service:
1. The meter has one-year warranty. If the meter works abnormally, please send the whole meter
to the company for maintenance.
2. Provide users with spare parts and lifelong maintenance service.
3. Provide the users with the meter inspection service for free.
4. Free technical support for long term.
Welcome to visit our company
GuangDong New Vision Film Co.,Ltd. is a professional manufacturer of car tint film,building film,safety film ect. Our Company is in Guangzhou,factory in Jiangmen city.We offer high
quality products to our customers from all over the world in competitive price.
Certification
We have passed SGS, CE, ROHS, ISO etc test, the products are deserving of your try.
Contact Information
