Audited Supplier
15PBG-3
1 Year
1 Year
2-4m
18-35L/Min
Motor
Stainless Steel
Single-stage Pump
Booster Pump
Electric
Electric Pump
Shield Circulating Pump
Clarified Water Pump, Chemical Pump, Underfloor Heating System,Hot Water Boiler
Water Pump
Sea Water Pump
Water Pump
Circulating Shield Pump
Shield Circulating Pump
1900 R/Min
72W
38W
18.5kg
50Hz
FLORANK
Carton
28.8x28x29.6cm
Taizhou
8413701090
Product Description
No-noise Solar Hot Water Circulation Pump for Underfloor Heating System
Features
This pump uses a stainless steel shielding sleeve to completely isolate the water from the coil winding, without the need for mechanical sealing, thus completely solving the problem of water leakage in the water pump. It adopts a high hardness ceramic shaft and ceramic bearings, with direct water circulation between the stator and rotor, which can be used for cooling and bearing lubrication, and completely solves the noise problem. The design is very scientific and advanced and it can be used continuously for 30000 hours without any faults or maintenance Silence, no leakage, no vibration, long service life, and no maintenance are the biggest characteristics of this pump.
This pump uses a stainless steel shielding sleeve to completely isolate the water from the coil winding, without the need for mechanical sealing, thus completely solving the problem of water leakage in the water pump. It adopts a high hardness ceramic shaft and ceramic bearings, with direct water circulation between the stator and rotor, which can be used for cooling and bearing lubrication, and completely solves the noise problem. The design is very scientific and advanced and it can be used continuously for 30000 hours without any faults or maintenance Silence, no leakage, no vibration, long service life, and no maintenance are the biggest characteristics of this pump.
Application Occasions
This pump is suitable for cold and hot water pressurization cycles below 100 C Solar energy, air energy; Supporting the underfloor heating system, such as: water mixer, water distributor, water collector, radiator automatic circulation pressurization; Hot water boiler; Central air conditioning supporting, low water pressure household washing machine supporting; Increasing the flow and pressure of tap water: Industrial liquid circulation water supply Pump body material: stainless steel copper, cast iron.
This pump is suitable for cold and hot water pressurization cycles below 100 C Solar energy, air energy; Supporting the underfloor heating system, such as: water mixer, water distributor, water collector, radiator automatic circulation pressurization; Hot water boiler; Central air conditioning supporting, low water pressure household washing machine supporting; Increasing the flow and pressure of tap water: Industrial liquid circulation water supply Pump body material: stainless steel copper, cast iron.
| Model 15PBG-3 | |||||
| Max.power | 72W | Ca. | 25(½") | weight | 18.5kg |
| Rat.power | 52W | Vo. | 220V | number | 8 |
| Min.power | 38W | Fr. | 50Hz | Car.size | 28.8x28x29.6cm |
| Gear | Max Head( m ) | Max Flow( L / min ) | Speed( r / min ) |
| III | 4 | 35 | 2200 |
| II | 3 | 30 | 1900 |
| I | 2 | 18 | 1450 |
ZHEJIANG FLORANK PUMP INDUSTRY Co., Ltd is a professional manufacturer and exporter of water pumps with over 15 years and specialized in manufacturing vortex pumps, centrifugal pumps, Jet pumps, sel-priming pumps, submersible pumps, screw pumps, sewage pumps, deep well pumps, oil pumps,. They are widely used for domestic appliance, agriculture irrigation, building construction, water boosting and transportation, waste water disposal etc.With its sound and rapid growth, FLORANK Pump has obtained Certificate of ISO9001: 2000 quality management system, CE certificate and passed the SGS Inspection and BV inspection.
The pumps have been sold and greatly welcomed in the markets of south-east Asia, the Middle East, Africa, East Europe and South America because of its reliable quality and competitive prices.
Professional, Experienced, Trusted, Reliable are FLORANK's concept and philosophy.
Q1:Could I put my own logo on it ?
A:Sure,We accept OEM and ODM .
Q2: What is your sample policy ?
A: We can supply the sample ,but the customers have to pay the shipping cost .
Q3:Could I produce according to the samples?
A:Of course .we can produce by your samples or technical drawing,We can build the molds.
Q4:How long is production time ?
A: Based on the quantities ,sample order 7-15 days,mass order 30-60days .
Q5:What is the standard package ?
A: Carton or wooden box.
Q6:Do you test all your goods before delivery ?
A:Of course,we have 100% test before delivery .
Why Partner With us
Not Your Competitor
We do not compete with our customers on a B2C basis.You won't find us selling directly on Amazon or anywhere else our customers are.
