Audited Supplier
DCFB-022
Octagonal Hammer
Copper Alloy
American Type, Metric, British, German Type, European Type
Dongcheng
Copper
Common
Anti-Explosion
Manual
Unfolded
Colorful
Adult
Explosion-Proof
Online
Bricklaying Trowel
Industrial
Oil Field
Mining
Industrial
Test Report&ISO9001
Wood, Fiberglass
OEM, ODM, Obm
OEM
Carton
2LBS-24LBS
China
8205200000
Product Description
Non Sparking Explosion Proof Hammer Instrument Aluminum Bronze Octagonal
Place of use:
Petroleum refining and petrochemical industry, coal mine, oil field, natural gas chemical industry, gunpowder industry, chemical fiber industry, paint industry, fertilizer industry, various pharmaceutical industry. Petroleum ships and liquefied petroleum gas vehicles, aircraft, warehouses dealing in flammable and explosive products, electrolysis workshops, communication machine assembly workshops, places requiring tools not to rust, wear resistance and magnetic resistance, etc.
Tool service
1,non-spark tools for our work in those inflammable and corrosive workplace staff to bring safety.
First of all, we should store the tool in a dry place, so that the working parts will not be damaged.
In our daily work, we should treat the surface attachment of the tool after 20 consecutive knocks, wipe it clean and then use it. Do not use it continuously, so as not to heat the tool because of prolonged friction, which may damage our tool products.
2,after use to wipe the surface dirt and accumulation, put in a dry safe place for storage.
3,percussion tools products, not continuous strikes, more than ten times should have a proper interval, and at the same time to remove the product part of the debris stuck before continuing to use.
4,wrench products can not be used in excess of force, but can not use sleeve or binding other metal rods to lengthen the lever arm, and use the hammer (except for tapping the wrench) method of screw fasteners.
5,cutting edge tools should be placed in the sink gently contact with the grinding wheel for grinding, not too strong and contact with the grinding wheel for too long.
6,in the actual operation of smashing tools, it is necessary to remove the debris on the site and the corrosion of the working surface to prevent the third party impact.
7,all kinds of products before use to remove the surface oil, according to the steel tools refer to the manual use.
https://dongchengtool.en.made-in-china.com/company-Linyi-Dongcheng-Hardware-and-Tools-Co-Ltd-.html
Material:Al-Cu//Be-Cu
Place of Origin:Shandong,China
Grade:Customized
Customized support:OEM,Customized
MOQ:10pcs
Use:Flammable and explosive places
Selling Units:Single item
HS CODE:8205200000
Package:opp bag/carton
Place of Origin:Shandong,China
Grade:Customized
Customized support:OEM,Customized
MOQ:10pcs
Use:Flammable and explosive places
Selling Units:Single item
HS CODE:8205200000
Package:opp bag/carton
| SIZE | 2lbs |
| 2.5lbs | |
| 3lbs | |
| 4lbs | |
| 6lbs | |
| 8lbs | |
| 10lbs | |
| 12lbs | |
| 14lbs | |
| 16lbs | |
| 18lbs | |
| 20lbs | |
| 24lbs |
Place of use:
Petroleum refining and petrochemical industry, coal mine, oil field, natural gas chemical industry, gunpowder industry, chemical fiber industry, paint industry, fertilizer industry, various pharmaceutical industry. Petroleum ships and liquefied petroleum gas vehicles, aircraft, warehouses dealing in flammable and explosive products, electrolysis workshops, communication machine assembly workshops, places requiring tools not to rust, wear resistance and magnetic resistance, etc.
| Material comparison | |
| Aluminum bronze Non-sparking tools 1. Appropriate for operation with ethylene concentration below 7.8% 2. Surface Color: Silver Yellow 3. Micro-magnetic 4. Hardness: 20-30 HRC 5. Tensile Strength: 782N/mm²-989N/mm² 6. Elasticity Limit: 450N/mm²-550N/mm² 7. Extensibility: δ≥5% | Beryllium Copper Non-sparking tools 1. Appropriate for operation with hydrogen concentration below 21% 2. Surface Color:Golden Yellow 3. Non-magnetic 4. Hardness: 30-40 HRC 5. Tensile Strength: 1117N/mm²-1326N/mm² 6. Elasticity Limit: 840N/mm²-880N/mm² 7. Extensibility: δ≤1.0% |
| To ensure the explosion-proof performance, after the raw materials are melt with scientific ratio, QC personnel will take sample piece to do drop weight and friction test according to GB/T 10686-2013 standard. The test is conducted under the highest level ExIIC, hydrogen concentration 21%. Only if the samples are tested qualified can the next step of production be carried out. | |
Tool service
1,non-spark tools for our work in those inflammable and corrosive workplace staff to bring safety.
First of all, we should store the tool in a dry place, so that the working parts will not be damaged.
In our daily work, we should treat the surface attachment of the tool after 20 consecutive knocks, wipe it clean and then use it. Do not use it continuously, so as not to heat the tool because of prolonged friction, which may damage our tool products.
2,after use to wipe the surface dirt and accumulation, put in a dry safe place for storage.
3,percussion tools products, not continuous strikes, more than ten times should have a proper interval, and at the same time to remove the product part of the debris stuck before continuing to use.
4,wrench products can not be used in excess of force, but can not use sleeve or binding other metal rods to lengthen the lever arm, and use the hammer (except for tapping the wrench) method of screw fasteners.
5,cutting edge tools should be placed in the sink gently contact with the grinding wheel for grinding, not too strong and contact with the grinding wheel for too long.
6,in the actual operation of smashing tools, it is necessary to remove the debris on the site and the corrosion of the working surface to prevent the third party impact.
7,all kinds of products before use to remove the surface oil, according to the steel tools refer to the manual use.
https://dongchengtool.en.made-in-china.com/company-Linyi-Dongcheng-Hardware-and-Tools-Co-Ltd-.html
