Audited Supplier
DABF-63 6kA 10kA Electromagnetic Residual Current Device RCBO Circuit Breaker
Introduction
The DABF-63 6kA 10kA electromagnetical residual current circuit breaker is designed by Dada engineers for stable operation, precise protection, short opening time, and a high breaking capacity index, all in one small device. The circuit breakers are also produced according to GB 10963 and IEC60898 standards.
The circuit breakers are commonly installed for the overload protection of contactors, relays, and other electrical equipment.
Main functions: short circuit protection, overload protection and isolation.
ModelDABF-63 3P+N/4P RCBO Circuit Breaker
| Rated current | Rated frequency | Rated operating voltage | Rated residual current | Rated insulation voltage | Impulse withstand voltage | Instantaneous trip type | Rated breaking capacity | W*H*L |
| 6-63A | 50-60Hz | 230/400V | 10,30,100,300A | 500V | 6KV | B/C/D | DABF-63 10KA, DABF-63 6KA | 72/90mm*95mm*72mm |
Technical parameter of DABF-63 electronic residual current circuit breaker
Protection grade: IP20
Flame retardant grade: grade2
Endurance (mechanical): 12,000
Endurance (electrical): 6,000
Electric wire: 1~25mm2
Operating temperature: -5~+40ºC
Altitude: ≤2000
Relative humidity: +20ºC, ≤90%; +40ºC, ≤50%
Class of pollution: 2
Installation environment: Avoid obvious shock and vibration
Installation grade: grade II, grade III
Installable accessories of DABL-63 electronic residual current circuit breaker
Auxiliary contact, alarm contact, shunt trip, undervoltage trip, overvoltage trip
Advantages
· Combined circuit with an electronic module of differential protection and integrated circuit breaker of DAB7-63 series.
· The most subtle electric shock hazard protection in case of direct contact with conducting parts.
· Independent contact position indicator.
· Wide range of operating temperatures from -25 to +40° С.
· Notches on terminal clamps provide for lowering thermal losses and boosting the mechanical stability of connection.
· "TEST" button for checking the device's operation and accuracy of connection.
· DABL dimensions correspond to 2-modular item at the expense of constructive elements placement.
· Boosted capability of 6 kA provides for installing AVDTs as incoming protection switches.
