Audited Supplier
M28
Standard
6-65
Flexible
Steel 1045, S45c, C45e
Elastic Coupling
Black Oxidizing Steel S45c
No Requirement of Lubrication
Vertically or Horizontally Assembled
Ubet Machinery
Blank Carton in Wooden Cases
BoWex 19, 28, 32, 38, 42, 48, 55, 65
China
8483900000
Product Description
Nylon Sleeve Gear Coupling
Curved-tooth Coupling / Coupling BoWex
Ubet Nylon Sleeve Couplings flexible shaft connections for a positive torque transmission and specifically suitable to compensate for axial, radial and angular shaft misalignment.
Ubet Nylon Sleeve Couplings are compact and require no lubrication. They are adapted to many applications including vertical and blind installations. They operate over a wide range of temperature at speed up to 5,000 RPM. This type of coupling is widely used in application such as Motor, Generator and Pump etc.
Features:
l Nylon-steel combined, maintenance free
l Compensation for axial, radial and angular misalignment
l Convenient axial plugging assembly
l Without bolts, pins, flanges to affect balance or safety
l No requirement of lubrication
l Excellent electrical insulation
l Can be vertically or horizontally assembled
l Tolerance of finished bore in appliance with ISOH7
Curved-tooth Coupling / Coupling BoWex
Ubet Nylon Sleeve Couplings flexible shaft connections for a positive torque transmission and specifically suitable to compensate for axial, radial and angular shaft misalignment.
Ubet Nylon Sleeve Couplings are compact and require no lubrication. They are adapted to many applications including vertical and blind installations. They operate over a wide range of temperature at speed up to 5,000 RPM. This type of coupling is widely used in application such as Motor, Generator and Pump etc.
Features:
l Nylon-steel combined, maintenance free
l Compensation for axial, radial and angular misalignment
l Convenient axial plugging assembly
l Without bolts, pins, flanges to affect balance or safety
l No requirement of lubrication
l Excellent electrical insulation
l Can be vertically or horizontally assembled
l Tolerance of finished bore in appliance with ISOH7
| l tem No. | l Item No. | l Finished bore range | l Outside Diameter | l Nominal Torque Nm |
| l UTNL-14 | l UTNL-14-L | l 6-14 | l 40 | l 10 |
| l UTNL-19 | l UTNL-19-L | l 8-19 | l 48 | l 16 |
| l UTNL-24 | l UTNL-24-L | l 10-24 | l 52 | l 20 |
| l UTNL-28 | l UTNL-28-L | l 10-28 | l 66 | l 45 |
| l UTNL-32 | l UTNL-32-L | l 12-32 | l 76 | l 60 |
| l UTNL-38 | l UTNL-38-L | l 14-38 | l 83 | l 80 |
| l UTNL-42 | l UTNL-42-L | l 20-42 | l 95 | l 100 |
| l UTNL-48 | l UTNL-48-L | l 20-48 | l 114 | l 140 |
| l UTNL-55 | l UTNL-55-L | l 25-55 | l 132 | l 240 |
| l UTNL-65 | l UTNL-65-L | l 25-65 | l 175 | l 380 |
