Audited Supplier
FCHA
Available
10 Years
Storage Pressure Vessel, Separation Pressure Vessel, Heat Pressure Vessel, Reaction Pressure Vessel
Mixture
Alloy
-0.1-15.0
Customized
Medium Pressure (1.6MPa≤p<10.0MPa)
New
2 to 3 Months
Available
Available
10 Years
California, USA
LUHAO
customized
China
84198990
Product Description
Autoclave, high-pressure kettle, is a high-pressure equipment for chemical reaction at high temperature and high pressure in industry, its pressure or temperature is higher than other process requirements, the requirements of raw materials, the manufacturing requirements of equipment, the requirements of the stirring system of the shaft sealing are very high, the kettle body has to withstand high pressure and temperature, the general use of bursting composite plate made of heavy kettle body, need to sort out the heat treatment in order to eliminate the stress, the process of stirring the rotational speed is not required to be high, mainly to the reaction of the mass transfer is the main focus, the mechanical sealing can not reach the high-temperature and high-pressure shaft sealing requirements, the magnetic coupling drive is the most ideal form of shaft sealing.
https://luhaochemreactors.en.made-in-china.com/product-list-1.html
| MODEL | FCHA300-800L | FCHA800-2000L | FCHA2500-5000L | FCHA6000-10000L | FCHA12000-15000L |
| CAPACITY | 300-800L | 800-2000L | 2500-5000L | 6000-10000L | 12000-15000L |
| WORK PRESSURE MPa | -0.1-15.0 | -0.1-15.0 | -0.1-12.0 | -0.1-12.0 | -0.1-10.0 |
| WORK TEMPERATURE °C | -15-320 | -15-320 | -15-320 | -15-320 | -15-320 |
| rpm | 0-320 | 0-320 | 0-320 | 0-320 | 0-320 |
| Motor power KW | 1.5-5.5 | 7.5-15.0 | 15.0-30.0 | 22.0-37.0 | 37.0-45.0 |
| Main materials | 09MnNiDR/16MnDR (low temperature steel), 15CrMoR (high temperature steel), stainless steel S30408/S32168/S31603, S39042, titanium material, duplex steel, shackle material, Hastelloy alloy, staggered material, Monel, etc., and explosive composite plates made from their materials. | ||||
| Heating form | Thermal oil jacket electric heating, steam jacket heating, outer half tube heating, inner coil tube heating. | ||||
| Mixing form | Disc turbine type, asymmetric turbine type, three blade impeller type, disc inclined blade, four wide blade, propulsion type, impeller type, anchor type, frame type, screw belt type, etc. | ||||
| Shaft sealing form | Magnetic coupling drive with static sealing, zero leakage, long service life, simple installation, safe and environmentally friendly. | ||||
| Remarks | Other special requirements, touch screen intelligent control, program control, and connection to DCS systems shall be designed, manufactured, and configured according to user needs. | ||||
https://luhaochemreactors.en.made-in-china.com/product-list-1.html| LUHAO Chemical Machinery Co. Ltd | ||||||||||||||
| Pressure Vessel Design Information Collection Table | ||||||||||||||
| Vessel | Jacket (Coil) | |||||||||||||
| Work Medium | Name | |||||||||||||
| Components | ||||||||||||||
| Density (Kg/m³) | ||||||||||||||
| Characteristics | ||||||||||||||
| Viscosity (cP) | ||||||||||||||
| Flow Velocity(m³/h) | ||||||||||||||
| Design pressure (Mpa) | ||||||||||||||
| Work pressure (Mpa) | ||||||||||||||
| Design temperature(ºC) | ||||||||||||||
| Work temperature (ºC) | ||||||||||||||
| Wall temperature (ºC) | ||||||||||||||
| Diamter (mm) | ||||||||||||||
| Length (mm) | ||||||||||||||
| Capacity(m³) | ||||||||||||||
| Effective capacity (m³) | ||||||||||||||
| Corrosion allowance (mm) | ||||||||||||||
| Corrosion speed (mm/year) | ||||||||||||||
| Recommended Materials | ||||||||||||||
| Lowest value of average monthly temperature(ºC) | ||||||||||||||
| Site location | ||||||||||||||
| Installation condition | Indoor or Outdoor | |||||||||||||
| Catalyst Volume(m³) | ||||||||||||||
| Catalyst Density(Kg/m³) | ||||||||||||||
| Heat Transfer Area() | ||||||||||||||
| Coil Specification | ||||||||||||||
| Basic Wind Pressure(Mpa) | ||||||||||||||
| Seismic Basic Intensity | ||||||||||||||
| Ambient Temperature(ºC) | ||||||||||||||
| Site Type | ||||||||||||||
| Operating Mode | ||||||||||||||
| Insulation Materials | Name | |||||||||||||
| Thickness | ||||||||||||||
| Density (Kg/m³) | ||||||||||||||
| Seal Requirements | ||||||||||||||
| Liquid Level Gauge | ||||||||||||||
| Emergency Cut-off | ||||||||||||||
| Static Electricity Removal | ||||||||||||||
| Anti Eddy Current Requirement for Liquid Outlet | ||||||||||||||
| Installation and Mantainance Requirements | ||||||||||||||
| Expected Useful Life (years) | ||||||||||||||
| Safety accessories | Vessel | Jacket (Coil) | ||||||||||||
| Location | ||||||||||||||
| Type | ||||||||||||||
| Specification | ||||||||||||||
| Quantity | ||||||||||||||
| Set pressure(Mpa) | ||||||||||||||
| Burst disc | ||||||||||||||
| Burst pressure(Mpa) | ||||||||||||||
| Safety discharge(kg/h) | ||||||||||||||
| Agitator | Type | |||||||||||||
| Impeller Diameter(mm) | ||||||||||||||
| Speed(r/min) | ||||||||||||||
| Motor | Model | |||||||||||||
| Power(kw) | ||||||||||||||
| Explosion Proof Grade | ||||||||||||||
| Speed reducer | ||||||||||||||
| Piping Table | ||||||||||||||
| No. | Dimension | Pressure | Connection Size Standard | Connection Surface Type | Function | |||||||||
| a | ||||||||||||||
| b | ||||||||||||||
| c | ||||||||||||||
| d | ||||||||||||||
| e | ||||||||||||||
| f | ||||||||||||||
| g | ||||||||||||||
| h | ||||||||||||||
| j | ||||||||||||||
| k | ||||||||||||||
| Other Requirements if any | ||||||||||||||
