OEM 24V 230V Water Motorized Soleniod Electric Brass Ball Valve with Actuator 3 Wires for Water

AC24V 110V 220V Female Water Solenoid Electric Brass Ball Valve For HVAC

JX-0313
Technical Parameters:

• Valve size: DN15, DN20, DN25
• Connection: threaded connection
• Valve structure: two-way, three-way
• Media: hot/cold water
• Pressure: PN20
• Close differential pressure: 0.18 ~ 0.22Mpa
• Power supply voltage: AC220V ± 10%, 50 / 60HZ
• Consumable power: <6.5W
• Run mode: On or Off

• SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable; The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last
• BSP&NPT THREADING-½" quality brass thread, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is a full port, meaning the bore in the ball is a full1/2"; This minimizes pressure loss through the valve; Perfect for home automation projects
• - Note: blue and brown wire cannot be connected to 230v and 24v with 2 options L at the same time. or the valve will be damaged
• The maximum pressure is 1.0Mpa. The nominal pressure is 1.6Mpa.
• Interface: DN15 = 1/2 inch; DN20 = 3/4 inch; DN25 = 1 inch; DN32 = 1-1 / 4 inch
• Flow: DN15 (1/2 inch): 11m3 / h; DN20 (3/4 inch): 20m3 / h; DN25 (1 inch): 60m3 / h; DN32 (1-1 / 4 inch): 80m3 / h;
• ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time
•