Audited Supplier
XTB-40
1year
1year
GB
Forging
Disposable
W6mo5cr4V2/Cr12MOV/38CrMoAl
Modular Design
W6mo5cr4V2
75mm/65mm/52mm/50mm/40mm/35mm
Twin Screw/Double Screw
Syntop
Wooden Case
China
8477900000
Product Description
1.Screw Configuration
It means a structure composed of different combinations to achieve the desired performance, such as disperse, shear effect, solving the requirements of mixed materials as well as the production stability.
Depending on the nature of work being carried out, there are Intake Zone, Conveying Zone, Melting Zone, Natural Venting Zone, Mixing Zone, Vacuum Venting Zone and Metering Zone.
Different screw elements own different features in different extrusion process, we should choose and design the right screw elements based on different extrusion status in order to optimize the overall comprehensive performance in the extrusion process.
The melting process in a co-rotating extruder is different. The thermoplastic is subjected to intense shearing. This work in an extruder is done by Kneading Blocks.The screw design must use the highest pitch conveying elements from the main feed area all the way through to the kneading elements.Transition screw elements will be installed first on the core shaft, Half are optical holes, half are internal splines.
Nitrided alloy.
Depending on the nature of work being carried out, there are Intake Zone, Conveying Zone, Melting Zone, Natural Venting Zone, Mixing Zone, Vacuum Venting Zone and Metering Zone.
Different screw elements own different features in different extrusion process, we should choose and design the right screw elements based on different extrusion status in order to optimize the overall comprehensive performance in the extrusion process.
2.Types of Screw Elements
Conveying Screw Elements are used to convey materials, vent water vapor, small molecule impurities and build required amount of pressure.The melting process in a co-rotating extruder is different. The thermoplastic is subjected to intense shearing. This work in an extruder is done by Kneading Blocks.The screw design must use the highest pitch conveying elements from the main feed area all the way through to the kneading elements.Transition screw elements will be installed first on the core shaft, Half are optical holes, half are internal splines.
3.Screw Elements Material
High Speed Tool Steel:W6Mo5Cr4V2, adopting vacuum quenching, the threaded components are hardened as a whole, with high wear resistance and strong toughness.Nitrided Steel:38CrMoAl;Cr12MoV,Stainless steel:316L,440C,WR30,WR45,9Cr18MoV,1.4112,Powder alloy:WR5,WR13,WR14Nitrided alloy.
