ONU Fiber Optic WiFi6 Zte F6610

Specifications

1. Support for Most of poplular OLT including ZTE Huawei Fiberhome Nokia OLT etc.
2. accord with H.248, MGCP, and the SIP protocol standards
3. Compliance with the 802.11 n / b / g / ac /ax protocol standards
4. Support the Ethernet business second floor exchange and up and down business line speed forwarding
5. Support for frame filtering and suppression
6. Support standard 802.1Q Vlan functionality and support VLAN conversion
7. Support for 4,094 VLAN's
8. Support for the dynamic bandwidth allocation function
9. Support for PPPOE, IPOE, and Bridge services
10. Support for QoS, including business flow classification, priority marking, queuing and scheduling, flow shaping, and traffic control
11. Support for IGMP Proxy and IGMP Snooping
12. Support Ethernet port speed limit, loop detection, second floor isolation
13. Support power failure alarm
14. Support for the remote reset and restart function
15. Support the recovery of the factory parameters function
16. Support data encryption
17. Support the status detection and fault reporting function
18. Support power protection

1. PON: connected to the source OLT device via optical fiber cable
2. Ethernet port: connected to the user side equipment through twisted pair network wire, LAN1-LAN4 port rate is 10 / 100 / 1000M adaptive Telephone port: connect to the user-side equipment through the telephone line
3. Reset button: restart the device; hold down for more than 3 seconds, the system will restore the factory default
4. WIFI button: no line is turned on / off by the function
5. WPS button: WPS is used to simplify security and network management for Wi-Fi wireless, Wi-Fi protection settings, you can depending on the client Support, choose the appropriate mode
6. LED button: The LED indicator light is on / off
7. Power switch: power supply on / off
8. Power interface: connect with external power supply