Audited Supplier
1500m
1800m3/h
Motor
Multistage Pump
High Pressure Pump
Single Suction Pump
Vertical Pump
Suction Centrifugal
Closed
Pump
Sinoflo
Export Wooden Case
cast iron, stainless steel
China
Product Description
Application of Stainless Steel Sea Water Submersible Dewatering Pump
Suitable for offshore platform fire-fighting, thermal dissipation, seawater desalinization, seawater lifting, coastal square fountain, mariculture and attemperation as ground source heat pump in coastal area.
Medium Range of Stainless Steel Sea Water Submersible Dewatering Pump
1 All kinds of seawater, alkaline corrosive water, clean water, cold water, rainwater, gushing water of mining, drinking water, etc.
2 Normal Water temperature range: +5ºC--+35ºC
High Temperature: 120ºC
3 Solid content (mass ratio): ≤0.01%
4 PH value: 7.9-8.6
Motor Parameter of Stainless Steel Sea Water Submersible Dewatering Pump
The submersible motor is lubricated by clean water. It must be filled with clean water or its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8
Power Source of Stainless Steel Sea Water Submersible Dewatering Pump
Voltage: 380v~10kv ,Frequency: 50Hz/60Hz
If you need special voltage or frequency, please inform us in advance.
Materials of Stainless Steel Sea Water Submersible Dewatering Pump
Impeller: SS316/316L/Duplex S.S
Pump bowl: SS316/316L/Duplex S.S
Pump shaft: stainless steel 316L/Duplex S.S. Filter :316L/Duplex S.S. Bolt:316/316L/Duplex S.S, Flange:316/316L/Duplex S.S
End bell (upper and lower): 316(L)Duplex S.S Middle part:316(L)Duplex S.S, Motor shaft:316(L)/Duplex S.S
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber
Advantages of Stainless Steel Sea Water Submersible Dewatering Pump
1 Easy installation
2 Low noise, multistage
3 Built-in checkvalve avioding water hammer impact.
4 High head with singlestage, strong stability,the shaft diameter φ50mm, improving the equipment's torsional property.
Bearing liner is made of natural rubber and more wear-resisting .
Supplys Scope of Stainless Steel Sea Water Submersible Dewatering Pump
Seawater submersible pump (including the body and motor), built-in checkvalve, 1 flange matching outlet,12 bolts 16×60
(8.8), 1 maintanence instruction, 1 conformity certificate,1 packing list, external packing.
