Audited Supplier
OTCY-2211
Excellent After-Sales Service
Lifetime
Ooitech
Sea Freight
OTCY-2211 OTCY-2222
China
Product Description
Machine Function
The solar panel laminator is the most important process in the solar panel production line.It uses to bond multiple layers of materials (EVA, Glass, Backsheet, Solar cell) together by heating vacuum in laminator chamber.
Technical Parameter
| Parameter | Laminated Size | Machine Size (MM) | NW (T) | Power (KW) | Pump | Annual Output | |
| Model | Max | Working | Speed | ||||
| OTCY-2211 | 2200×1100 | 2560×1460×1270 | 3.2 | 27 | 4.4-17.3 | 30 L/S | 2.4MW |
| OTCY-2222 | 2200×2200 | 2560×2830×1270 | 4.8 | 33 | 6~19 | 30 L/S | 4.8MW |
| Heating Mode | Oil Heating | Power Supply | AC380V Triphase five Wires |
| Control mode: | manual/ automatic | Working Vacuum | 100mpa |
| Laminating Time | 6-8mins (excluding curing time) | Temperature Control | Intelligent PID Temperature Control |
| Temperature Precision | ±2ºC | Environmental Temperature | 0ºC-50ºC |
| Temperature Range | 30ºC-180ºC | Temperature Uniformity | ±2ºC |
| Module Height | 25mm | Air Supply required | 0.6-0.8MPa |
| Vacuuming time | 2-6Min | Compressed air flow required | 50L/Min |
Performance features
1. Intelligent temperature control systemMake the temperature more uniform and more easily set and control the temperature.
2. Laminating pressure adjustable
Can adjust the pressure according to the production process requirement, makes good quality solar panel.
3. 24 hours continuous working in high temperature.
4. The advanced touch screen operation panel
Easy operation, quick response, more stable performance, and reduced failure rate.
5. Humanity system operation process
equipment is equipped with many detection switches. In normal production, operators will only be required to put the modules on the heating platform and press the cover switch.
The equipment will be automatically laminating, cure and open cover automatically and wait for operator to start the next procedure.
Safety assurance
1. With hydraulic safety lockEquipment accident power off or open cover in a position, the cover will automatically lock in the current position, not falling. Ensure the safety of operator.
2. Set the emergency button switch
When unexpected emergence happens, press the emergency button, the machine will cut off the working power supply, the cover will remain the old position. Ensure remove the accidents and working process.
3. The alarm system:
The machine installs 8 sets alarm device, it will alarm in the following situation, ensure the accuracy and normal working state, improve quality.
- Oil shortage
- Heating over temperature
- Vacuuming fault
- Open cover in under pressure situation
- Vacuum pump fault
- Heating fault
- temperature measurement module fault
- Illegal operation
4. With emergency open cover device
When falling power off accidentn,it can open the cover to remove the components for processing.
5. Low voltage control in the equipment control circuit Easy for charged repair, and improve the safety.
Structure features
1. The steering structure of touch screen.Leading technology, pretty appearance, compact structure, and convenient operation.
2. The seal ring is placed overhead to extend the service life.
3. Power arm balancing and lifting structure makes the opening and closing of upper room more stable and safer.
4. Anti-fold structure of the rubber plate could extend the service life of the
rubber plate.
5. Use finishing thick steel plate as heating platform.
In the lower part of this
platform a full closed oil circulation system is adopted which ensures the
uniformity and controllability of temperature when packaging the components.
Application features
It can be one-time laminating and curing and three times laminating and curingare workable. The equipment of module production has high compatibility.
Main Parts
1. PLC: siemens
2. Touch Screen: Kunlun-state 10-inch
3. AirTAC cylinders
4. Vacuum Pressure Switch: Japan brand SMC
5. Vacuum Pump: China famous brand Sichuan Huaxin
Package and Shipping
