Audited Supplier
02113254 SLAK00RACK01 RTN 910
Telephone, Computer, Workstation, Server, Mobile phone, Laptop
Wireless
Ethernet
Data
CE, ISO, RoHS, GS
New
02113254 Slak00rack01 Rtn 910
Sea Surface, Land, Hills and Forests, Islands
1 Year
Wireless LAN, TCP, IP, WiFi, IP Microwave
6 ~ 42 GHz
3.5/ 7/14/28/40/56/112 MHz
12
32*32 Vc-4
-38.4 V~-57.6 V
Wireless Long-Distance Transmission Feature
59X39X23 Cm
12.000 Kg
Access Layer and Aggre
Determine Based on ODU Bandwidth
High Efficiency/High Performance
for HUAWEI
Strong
Single gross weigh 12.000 kg
Guangdong China
Product Description
Split Type Long Range Microwave Transmission Equipment Assembly IDU RTN 900 Series(RTN 910)
OptiX RTN 910 Assembly Case (-48V) 02113254 SLAK00RACK01
The Huawei 6-42 GHz traditional frequency IP microwave has a maximum of 2 Gbit/s per carrier and 16 Gbit/s per antenna ultra-large transmission capacity, it is the industry's first IP microwave that supports TDM/Hybrid/Packet/ Routing services on the unified platform, satisfying the requirements of large-capacity IP service transmission and IP-based evolving of traditional PDH/SDH microwave. The solution provides a flexible architecture that can be deployed in split, full-outdoor, or full-indoor scenarios. It features high reliability and end-to-end unified O&M management. It is widely used in broadband wireless transmission in vertical sectors, such as government, broadcasting, oil & gas, education, and electric power.
The OptiX RTN 910 is a product in the OptiX RTN 900 radio transmission system series:
- 1.1 Network Application
The OptiX RTN 900 is a new generation TDM/Hybrid/Packet integrated microwave transmission system developed by Huawei. It provides a seamless microwave transmission solution for mobile communication network or private networks. - 1.2 Components
The OptiX RTN 910 adopts a split structure. The system consists of the IDU 910 and the ODU. Each ODU is connected to the IDU 910 through an IF cable. - 1.3 Configuration Modes
The OptiX RTN 910 supports different configuration modes in which different system control, switching, and timing boards, IF boards, and ODUs are configured, suited for various microwave application scenarios.
Item | Description |
|---|---|
Chassis height | 1U |
Pluggable | Supported |
Number of radio directions | 1 or 2 |
RF configuration mode |
|
| Service interface type |
|
1.OptiX RTN 900 product family| Product Name | IDU Appearance | Characteristic |
|---|---|---|
| OptiX RTN 905 | |
|
| OptiX RTN 910 |
| |
| OptiX RTN 950 |
| |
| OptiX RTN 950A |
| |
| OptiX RTN 980 |
|
2.OptiX RTN 910A
Network layer | Suitable for: access layer and aggregation layer |
Frequency band | 6 ~ 42 GHz |
Channel spacing | 3.5/ 7/14/28/40/56/112 MHz |
Bandwidth | Determine based on ODU bandwidth |
Modulation mode | QPSK Strong,QPSK,16QAM Strong,16QAM,32QAM, 64QAM,128QAM, 256QAM,512QAM,512QAM Light, 1024QAM,1024QAM Light,2048QAM, 4096QAM |
Maximum number of RFUs | Based on the RTN910A technical specifications |
RF direction | 6 |
Air port capacity | Single carrier 1166~2500 Mbit/s (non XPIC) |
Exchange capacity | 90 Gbit/s (using CSHOF), 10 Gbit/s (using CSHO) |
TDM crossover capacity | 32×32 VC-4 |
Link aggregation | 2-4 |
Interface type | E1,T1,STM-1(e/o),FE(e/o),GE(e/o), 2.5GE(o) ,10GE(o) |
Transmit power @QPSK | Based on the RTN910A technical specifications |
Super dual frequency | Based on the RTN910A technical specifications |
L3 VPN | Based on the RTN910A technical specifications |
eCPRI support | Based on the RTN910A technical specifications |
Rf configuration mode | N+0 N×(1+0) 1+1 N+1 XPIC 2 × 2 CA 4 ×4 MIMO |
Feature | Ethernet II, IEEE 802.3 and IEEE 802.1q/p field addition/deletion, and VLAN label exchange (IEEE 802.1q/p) ISIS, OSPF, BGP, RSVP, LDP Support for flow control (IEEE 802.3x) Support Link Aggregation Group (IEEE 802.3ad LAG and L1 LAG) RMON (IETF RFC 2819) |
Business type | Native ETH service: E-Line dedicated line service and E-LAN private network service PW based Native ETH services: E-Line dedicated line services, Ethernet aggregation services, E-LAN private network services (VPLS, representing virtual private network services) L3VPN, L2VPN (VLL), CES, MCE |
Key characteristics | CES E1, IEEE 1588v2, USB start, H-QoS, PLA/EPLA/EPLA+, AES-256 encryption, device anti-theft, 1+1, N+1, XPIC, AM, TDM, PWE3/MPLS, SDB, L3VPN, CA, MIMO |
Antenna | Parabolic antenna: 0.3m~3.7m |
IDU Weight | 5.4 kg(1+0) 6.2 kg(1+1) |
IDU Specification | 442 mm × 220 mm × 88 mm |
Environment | Temperature: IDU -5 °C ~+60 °C ; ODU -33 °C ~ +55 °C Humidity: IDU 5%~95%; ODU 5%~100% |
Power source | -38.4 V~-57.6 V |
Certificate | CE,RCM, FCC,IC,ETL,MCMC |
3.Board
SLJCSHR01 | Single board software - SLJ1CSHR-SLJCSHR01- Main control exchange processing board software package - And Flash IMAGE - Burning type | 05021TRA |
SLJ1CSHR01 | Functional module - OptiX RTN 910A-SLJ1CSHR01-16 * E1 (Native TDM)/4 * GE (RJ45)/2 * GE (SFP)/2 * IF IDU module (-48VDC) -910A | 02311FCA |
SLJCSHR02 | Single board software - SLJ1CSHR-SLJCSHR02- Main control switch board software package - NorFlash - Burning type | 05021SSY |
SLJCSHR03 | Single board software - SLJ1CSHR-SLJCSHR03- Main control switch board logic software - CPLD - loading type | 05021SXT |
SLJCSHR12 | Single board software - SLJ1CSHR-SLJCSHR12- Main control switch board logic software - FPGA - loading type | 05021UAM |
SLJCSHR10 | Single board software - SLJ1CSHR-SLJCSHR10- Main control switch board logic software - FPGA - loading type | 05021UAL |
SLJ1CSHRF | Produced board - OptiX RTN 910A-SLJ1CSHRF-2 * GE (RJ45)+4 * 10GE (SFP+)+16 * E1+2 intermediate frequency unit single board | 03025DJV |
SLJCSHRFA02 | Single board software - SLJ1CSHRFA-SLJCSHRFA02- Main control integrated intermediate frequency unit board software package - NandFlash burning type | 05022ULC |
SLJCSHRFA01 | Single board software - SLJ1CSHRFB-SLJCSHRFB01- Main control integrated intermediate frequency unit board software package - SPI NorFlash - Burning type | 05024ANY |
The product is 100% genuine and has sufficient stock in stock;
Price discounts and fast delivery;
After sales service guarantee; Support sample and customization services.
Q: Are you a trading company or a manufacturer? Can I use our own logo and label?
A: We are a trading company that provides domestic and international trade services. We also provide OEM/OEM services.
Q: What are the guarantees for product quality?
A: We have professional engineers who test each piece of equipment before shipment to ensure that the shipped products are in good condition.
Q: How did you resolve a defective product when I received it?
A: We have professional personnel to help you solve the problem. If the product is defective, we usually offer you a return, refund, or replacement of the defective product.
Q: What is your payment method and delivery time?
A: We accept credit cards, wire transfers, PayPal, and other payment methods. We also support fast shipping within 72 hours.
Q: What is the MOQ and how long is the warranty period?
A: The minimum order quantity for normal products is 1, and the product warranty period is usually 1 year.
