Audited Supplier
With a HRSG, Heat Recovery Steam Generator, we could tailored manufacture ORC / steam turbine generator, to recover hot gas in pyrolysis process in some machines, like continous carbonization dryer, to electricity.
Besides, Whatever the requirements are, we provide either bare steam turbine drivers to OEMs, or we supply complete packages including gears, lube oil systems and controls. Our steam turbines include standard single stage turbines for pump, fan & small compressor drives according to API 611 General Purpose (GP) standard, standard and engineered single stage turbines as generator drives for waste heat recovery applications and engineered single stage turbines and standard mulitstage turbines for applications according to API 611 (GP) or API 612 (Special Purpose - SP) standards. Its power output is 10kW up to 25 MW. The inlet steam pressure is 8 to 139 bar(a) and the inlet steam temperature is 180 to 550 °C.
Tailored to your needs, delivered with dedication - Discover our range of services for Refineries,Waste-to-energy plants,Pulp and paper mills,Biomass plants,Petrochemical and chemical plants,Sugar mills,Institutional,Food processing,Steel industry,Mechanical drives,Marine applications,Turbogenerator sets,Replacement of steam pressure reduction valve,Feed water pump drives,Cooling water pumps,Fans,Process pump drives,Compressors,Lube oil pump drives etc.
Some Standard single-stage steam turbine overview
Rugged, versatile design
Electronic governor
Horizontally split casing with centerline support
Overspeed mechanical trip valve, separated from governor valve
Carbon ring or labyrinth sealing glands
Built-in, removable steam strainer
API style blanket lagging / insulation (API applications)
Oil ring with forced pressure lubrication or circulating oil cooling options
Rolling element or tilting pad thrust bearings
Broad range of controls and accessories available
Steam turbine applications
Screw expander generator applications
Small output ones, including steam turbines and screw expander generators,
Technical data (metric units) of Some models listed for reference. Tailored ones accepted
| Power output | Turbine speed | Inlet steam temperature | Inlet steam pressure | Back-pressure | Condensing pressure | Bleedings / Extractions | |
| SMMESTG240KW | 240 kW | 3000 or 3600 rpm | ≤ 440 °C | ≤ 47 bar(a) | ≤ 12 bar(a) | ||
| SMMESTG250KW | 250 kW | 3000 or 3600 rpm | ≤ 440 °C / 824 °F | ≤ 47 bar(a) / 682 psi | ≤ 12 bar(a) / 174 psi | ||
| SMMESTG21865KW | 1,865 kW | 3000 or 3600rpm | ≤ 482 °C | ≤ 63 bar(a) | ≤ 21 bar(a) | ||
| SMMESTG22500KW | 2,500 kW | 3000 or 3600 rpm | ≤ 520 °C | ≤ 120 bar(a) | 21 bar(a) | ||
| SMMESTG23500KW | 3,500 kW | 3000 or 3600 rpm | ≤ 482 °C | ≤ 63 bar(a) | ≤ 202 bar(g) | ||
| SMMESTG23501KWC | 3,500 kW | 3000 or 3600 rpm | ≤ 440 °C | ≤ 49 bar(a) | ≤ 6 bar(a) | ≤ 0.05 bar(a) | |
| SMMESTG23640KW | 3,640 kW | 3000 or 3600 rpm | ≤ 530 °C | ≤ 101 bar(a) | ≤ 33 bar(a) | ||
| SMMESTG24500KW | 4,500 kW | 3000 or 3600 rpm | ≤ 550 °C | ≤ 125 bar(a) | ≤ 40 bar(a) |
Tailored models, to recover hot gas in pyrolysis process with HRSG / Heat Recovery Steam Generator, could be manufactured according to your detailed specfications.
On spot instruction for installation ,maintenance, repairments could be made against customers' / cliens' requirements.
Whole power station, including fuel supplying / handling machines, boiler and after treatments devices, Deaerator, steam turbine driver, electricity geneators, gears, oil lubrication system, condensor, cooling tower, pumps, etc. could be supplied at one stop.
