Audited Supplier
BK-883B
ISO 9001:2008
25kg Per Woven Bag
White
Paint, Inks, Adhesive, Grease, Cosmetics
Powder
Thixotropic Consistency
Powder
Industrial
White
Jingyi
25kg/Bag
25KG/BAG
Huzhou, Zhejiang
Product Description
BK-883B is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity.
1. Advantages:
☆ High gelling efficiency over low, medium and high polarity organic liquids, especially in 200#solovent oil, coal tar, aromatic compounds.
☆ Produce reproducible thixotropic consistency over a wide temperature range.
☆ High viscosity and excellent thickening property over a wide temperature range.
☆ Imparts particle suspension, preventing hard settling of pigment and fillers.
☆ Exerts strong film reinforce action in organic binder systems.
2. Typical Properties:
3. Typical Applications:
4. Incorporations:
BK-883B belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate)is 40%-60% by weight of BP®-183-B.
It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.
5. Recommended Levels:The amount of BK-883B rheology modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.
6. International Countertypes: Bentone®34, Bentone®52, Tixogel® VP, Claytone®HT.
1. Advantages:
☆ High gelling efficiency over low, medium and high polarity organic liquids, especially in 200#solovent oil, coal tar, aromatic compounds.
☆ Produce reproducible thixotropic consistency over a wide temperature range.
☆ High viscosity and excellent thickening property over a wide temperature range.
☆ Imparts particle suspension, preventing hard settling of pigment and fillers.
☆ Exerts strong film reinforce action in organic binder systems.
2. Typical Properties:
| Color | Appearance | Density | Moisture (@105ºC,2hrs) | Fineness through 200 mesh | Loss on Ignition ( @1000ºC ) |
| Light Yellow | Free Flowing Powder | 1.7g/cm3 | ≤3.5% | ≥98% | ≤35% |
3. Typical Applications:
| Alkyd paint | Zinc-rich paint |
| Anti-corrosion paint | Inks(mineral oil) |
| Bituminous paint | Inks(Nitro) |
| Chlorinated rubber paint | Adhesive |
| Marine paint | Putties and sealant |
| None solvent epoxy paint | Lubricating grease |
| Primer paint | Oil drilling mud |
| Road paint | Waster water treatment |
| Silica paint |
4. Incorporations:
BK-883B belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate)is 40%-60% by weight of BP®-183-B.
It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.
5. Recommended Levels:
6. International Countertypes: Bentone®34, Bentone®52, Tixogel® VP, Claytone®HT.
