Audited Supplier
6ES7223-1BL32-0XB0
Program
Combination
Linear
Continuous
Automatic Control, Protection, Monitoring, Measurement, Simple Type
New
Non-Customized
Dual
PLC Control
PWM Control
Voltage
High Voltage Variable-Frequency Drive
AC-DC-AC Variable-Frequency Drive
Voltage Variable-Frequency Drive
Siemens
70 mm
100 mm
75 mm
Carton
Weight, approx. 310 g
German
8537101190
Product Description
The newest digital input/output modules,PLC,16 DI/16 DO, 16 DI 24 V DC, Sink/Source, 16 DO, transistor 0.5 A
Overview
- Digital inputs and outputs as supplement to the integral I/O of the CPUs
- For flexible adaptation of the controller to the relevant task
- For subsequent expansion of the system with additional inputs and outputs
Application
Digital input/output modules permit:
- Connection of the controller to digital signals of the process
- Output of digital signals from the controller to the process
This provides users with the following advantages:
- Optimum adaptation:
With signal modules which can be mixed as desired, users can adapt their controllers exactly to the relevant task. This avoids superfluous investments. Modules with 8, 16, and 32 input/output channels are available. - Flexibility:
If the task is expanded subsequently, the controller can be upgraded. Updating of the user program is extremely simple
Function
The SM 1223 digital input/output signal modules convert:
- the level of the external digital signals from the process into the internal signal level of the S7-1200 controller and
- the internal signal level of the SIMATIC S7-1200 Controller into the external signal level required for the process.
Function
The SM 1222 digital output signal modules convert the internal signal level of the SIMATIC S7-1200 Controller into the external signal level required for the process.
Data sheet 6ES7223-1BL32-0XB0
| SIMATIC S7-1200, Digital I/O SM 1223, 16 DI/16 DO, 16 DI 24 V DC, Sink/Source, 16 DO, transistor 0.5 A | |
| General information | |
| Product type designation | SM 1223, DI 16x24 V DC, DQ 16x24 V DC |
| Supply voltage | |
| Rated value (DC) | 24 V 20.4 V 28.8 V |
| permissible range, lower limit (DC) | |
| permissible range, upper limit (DC) | |
| Input current | |
| from backplane bus 5 V DC, max. | 185 mA |
| Digital inputs | |
| 4 mA; per channel |
| output voltage / header | |
| supply voltage of the transmitters / header | |
| Yes |
| Power loss | |
| Power loss, typ. | 4.5 W |
| Digital inputs | |
| Number of digital inputs | 16 |
| 2 |
| Input characteristic curve in accordance with IEC 61131, | Yes |
| type 1 | |
| Number of simultaneously controllable inputs | |
| all mounting positions | |
| - up to 40 °C, max. | 16 |
| horizontal installation | |
| - up to 40 °C, max. | 16 |
| - up to 50 °C, max. | 16 |
| vertical installation | |
| - up to 40 °C, max. | 16 |
| Input voltage | |
| DC |
| 24 V |
| 5 V DC at 1 mA |
| 15 V DC at 2.5 mA |
| Input current | |
| 1 mA 2.5 mA 4 mA |
| Input delay (for rated value of input voltage) | |
| for standard inputs | |
for interrupt inputs
| Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four | ||
| Yes | |||
| Cable length | |||
| 500 m 300 m | ||
| Digital outputs | |||
Number of digital outputs
| 16 1 No; to be provided externally L+ (-48 V) | ||
| Short-circuit protection | |||
| Limitation of inductive shutdown voltage to | |||
| Switching capacity of the outputs | |||
| 0.5 A 5 W | ||
| Output voltage | |||
| 24 V 0.1 V; with 10 kOhm load 20 V DC | ||
| Output current | |||
| 0.5 A 0.5 A 10 µA | ||
| Output delay with resistive load | |||
| 50 µs 200 µs | ||
| Total current of the outputs (per group) | |||
| horizontal installation | |||
| - up to 50 °C, max. | 8 A; Current per mass | ||
| Relay outputs | |||
| Switching capacity of contacts | |||
| 0.5 A 5 W 0.5 A | ||
| Cable length | |||
| 500 m 150 m | ||
| Interrupts/diagnostics/status information | |||
| Alarms | |||
| Yes | ||
| Diagnostics indication LED | |||
| Yes Yes | ||
| Potential separation | |||
| Potential separation digital inputs | |||
| 2 | ||
| Potential separation digital outputs | |||
| 1 500 V AC | ||
| Degree and class of protection | |||
| IP degree of protection | IP20 | ||
| Standards, approvals, certificates | |||
| CE mark | Yes | ||
| CSA approval | Yes Yes Yes Yes | ||
| UL approval | |||
| cULus | |||
| FM approval | |||
| RCM (formerly C-TICK) | Yes Yes Yes | ||
| KC approval | |||
| Marine approval | |||
| Ambient conditions | |
| Free fall | |
| 0.3 m; five times, in product package |
| Ambient temperature during operation | |
| -20 °C 60 °C -20 °C 60 °C -20 °C 50 °C 5°C to 55°C, 3°C / minute |
| Ambient temperature during storage/transportation | |
| -40 °C 70 °C |
| Air pressure acc. to IEC 60068-2-13 | |
| 660 hPa 1 080 hPa |
| Relative humidity | |
| 95 % |
| connection method / header | |
| required front connector | Yes |
| Mechanics/material | |
Enclosure material (front)
| Yes |
| Dimensions | |
| Width | 70 mm 100 mm 75 mm |
| Height | |
| Depth | |
| Weights | |
| Weight, approx. | 310 g |
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
Hot selling brand
Packing and shipping
FAQ
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
