Audited Supplier
OTT Silicone Medical Grade Platinum Cure Liquid RTV2 Silicone Rubber for Insole
OTT Silicone Medical Grade Platinum Cure Liquid RTV2 Silicone Rubber for InsoleOTT Silicone Medical Grade Platinum Cure Liquid RTV2 Silicone Rubber for Insole
| Silicone Shoe Insole (Food grade) | ||||||||||
| Item | Mixing Ratio | Color | Hardness(shore A) | Viscosity (mPa.s) | Working Time (25ºC) | Curing Time (25ºC) | Tear-Strength (kN/m) | Tensile- Strength (Mpa) | Elongation (%) | Shrinkage(%) |
| OTT-X805 | 1:1 | translucent | 5±2 | 2000±1000 | 5-30mins | 1-4h | ≥10 | ≥2.0 | ≥400 | ≤0.1 |
| OTT-X810 | 1:1 | translucent | 10±2 | 3000±1000 | 5-30mins | 1-4h | ≥13 | ≥3.0 | ≥400 | ≤0.1 |
| OTT-X815 | 1:1 | translucent | 15±2 | 4000±1000 | 5-30mins | 1-4h | ≥15 | ≥4.0 | ≥400 | ≤0.1 |
| OTT-X710 | 1:1 | clear | 10±2 | 3000±1000 | 5-30mins | 1-4h | ≥7 | ≥2.5 | ≥650 | ≤0.1 |
| OTT-X720 | 1:1 | clear | 20±2 | 6000±1000 | 5-30mins | 1-4h | ≥15 | ≥4 | ≥560 | ≤0.1 |
| OTT-X730 | 1:1 | clear | 30±2 | 14000±1000 | 5-30mins | 1-4h | ≥18 | ≥6.2 | ≥500 | ≤0.1 |
1. What's silicone products you are making?
--liquid silicone, silicone rubber, silicone oil; Due to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team to control the quality during production. Goods will be 100% inspected before shipment.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is: #A, Please choose the right liquid silicone according to your products. #B, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use. #C, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
