Outdoor Cable Support Clamp for Opgw ADSS Fiber Cable

Preformed Aluminum Alloy Wire Suspension Support Clamp for Opgw ADSS Fiber Cable

1. Through Type Feeder Clamps for coaxial, fiber optic, power, hybrid and aerial cables.

2. The clamp is designed to support cables with the dimensions of 1/2", 3/8", 1/2S", 5/8", 7/8", 1-1/4", 1-5/8", 2-1/4".

3. It is installed on cable ladder, rung, bracket, i-beam, profile such as towers, ladders and masts at telecom site.

4. Without additional adapters, provide sturdy, reliable, long-term support.

5. Easy-to-install, Wind loaded, UV and corrosion resistant

6. Capable to working in extreme temperature.
 

The pole band is used to wrap on the pole, it is also named pole fastener, pole fastening clamp, pole band clamp, and pole bracket. According to the structure, the pole band includes single offset pole band and double offset pole band.

According to the application, there are utility pole bands, telephone pole brackets, and cable pole bands. Pole fastening clamps can be used with guy wires. The cable pole band can be commonly used to connect the ADSS and OPGW cable. There is an extended leg on one piece of pole band. The hole on the extended leg will connect the ZH clevis, and U clevis.

A pole band is designed to be suitable for use on poles of pole top diameters of 150mm to 280mm. We have supplied a diameter of 155mm, 185mm, 230mm, and so on.

The pole band has a stay tension strength not exceeding 29kn. While the result will be different if a gain grid or some other device is used to transfer the shear load from the pole bolt.

Rax Industry pole band raw material is flat carbon steel, not slitting steel. The raw material is soft and highly malleable. The carbon steel tensile strength is up to 560N/MM2. With the strict selection of the raw material, there will be no broken or cracks on the pole band, after stamping on the flat steel.

The finish of the Rax Industry pole band is hot-dip galvanized according to ISO 1461.