Audited Supplier
M1040
Centerless Grinding Machine
Outer Diameter
Grinding Wheel
Artificial
Manual
Plunge Cylindrical Grinder
High Precision
CE, ISO 9001
New
2-40mm
120mm
Psa350X125X127mm
Psa250X125X75mm
1870 Rpm
10-200 Rpm
2000kg
0.002mm
0.003mm
Ra0.32um
CHANGYI
Wooden Case Package, Waterproof Case Package
1550x1300x1405mm
Wuxi, China
84602990
Product Description
M1050A centerless grinder
Machine tool main characteristics
Through grinding
It is used for grinding the outer surface of cylinders and ring parts.
Cut-in grinding
It carries out semi-automatic or automatic cut-in grinding of cones and all kinds of formed rotational parts with a taper of less than 1:20.
Machine Tool main features
The bed adopts normalized heat treatment and natural aging treatment of high-quality castings with undetermined internal structure to ensure strong wear resistance and small deformation in the process of use.
Grinding wheel, guide wheel device. The machine tool adopts the fixed grinding wheel frame and the introduction frame moving mode. two. The grinding wheel is a cantilever structure, and the spindle of the grinding wheel adopts multi-piece long bearing dynamic pressure oil film bearing. 3. The introduction is a cantilever structure, and the introduction spindle adopts an integral 1:30 cone sliding bearing.
The feed device
The introduction frame feed guide wheel adopts flat V-type hydraulic unloading guide rail.
Hydraulic transmission and stepless speed regulation are adopted in the sand dressing device and regulating wheel dresser reciprocating.
The regulating wheel
speed regulation of electric control device adopts AC frequency conversion stepless speed regulation.
Technical data
| Technical data | |
| Plunge-feed | |
| 1.Grinding diameter | 5-50mm |
| 2.Grinding length | 120mm |
| Trough-feed | |
| 5-50mm |
| 145mm |
| Grinding wheel spec. | P400x150x203mm |
| Regulating wheel spec. | PSA300x150x127mm |
| Grindiing wheel speed | 1668rpm |
| Regulating wheel speed | 10-200rpm |
| Swiveling Angle of Regulating wheel | |
| -2~+5° |
| -1°~+3° |
| Feed/Division | 0.002mm |
| Dresser Feed Amount/Division | 0.01mm |
| Height from center line of grinding wheel and regulating wheel to work rest | 220mm |
| Total power | |
| Grinding wheel motor | 11kw |
| Regulating wheel motor | 1.5kw |
| Power supply | 3N 50Hz 380V |
| Dimension(L X W X H) | 1920x1681x1479mm |
| Machine weight | 2800kg |
| Accuracy(standard bars) | |
| Roundness | 0.002mm |
| Cylindricity | 0.003mm |
| Roughness | Ra0.32um |
