Audited Supplier
High linearity from 1A to 100kA
Wide dynamic range
Very useful with large size or awkward shaped conductors or in places with limited access
No danger from open-circuited secondary
Not damaged by large overloads
Non-intrusive, no power drawn from the main
Measurement uniformity at any position of the conductor inside the coil
Excellent degree of rejection to the external current conductor
Feature:
FCT is a flexible current transducer based on Rogowski principle, particularly suitable for measurement in combination with portable devices. FCT coils are available in different sizes and can be supplied according to customer's design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/or weight.
Due to its specific features, flexible Rogowski coil is an extremely confortable solution for current measurement and can be used in a number of cases where traditional current transducer is not the adequate solution.
FCT coil is provided with a shield against the influence of external magnetic fields, therefore it grants a stable measurement from low currents to hundreds of kA. The Rogowski coils must be connected to an electronic integrator for 90° phase shift compensation and frequency equalization. Our DIN-RAIL and panel meters can interface Rogowski coils directly without the need of the external integrators. This is an advantage because there is no external boxes or any power supply with consequent ease of use. The particular features of the Rogowski coils combined with the extremely flexible input programming of our portable meters, allow to carry out measurement by all applications.
Specification:
MODEL | FCT-420 | FCT-510 | FCT-620 | FCT-800 | |
Coil length | 420mm | 510mm | 620mm | 800mm | |
Window size | 120mm | 150mm | 185mm | 240mm | |
Weight | 105g | 120g | 135g | 165g | |
Reference Rated current | 1000A | 3000A | 6000A | 10kA | |
Coil Resistance | from 100 to 300 Ω | ||||
Coil Section | 11mm | ||||
Lead length | 2meter | ||||
Output (di/dt) | Uncalibrated | 120mV/kA@50Hz | |||
Calibrated | 50mV/kA@50Hz | ||||
85mV/kA@50Hz | |||||
100mV/kA@50Hz | |||||
Read Accuracy | Calibrated<0.5% (central position, 25ºC) Uncalibrated < 5% tolerance (central position, 25ºC) | ||||
Temperature | Uncalibrated 200ppm/C | ||||
Calibrated 300ppm/C | |||||
Position Error | ±1% maximum | ||||
Output on 0A (zero drift) | ≤0.05mV | ||||
Phase error | ≤0.5° | ||||
Linearity | ±0.2% of reading | ||||
Bandwidth | 1Hz to 1MHz(-3dB) | ||||
Operating temperature | -30ºC to 80ºC | ||||
Storage temperature | -40ºC to 90ºC | ||||
Other requirements, please contact us to OEM. | |||||
Lonwow Industry Co., Ltd. is a leading manufacturer of electrical metal conduits and fittings in Jiangsu Province, China.
This factory is focused on Electrical Metallic conduits, fittings, C channels, and power bridge systems since 2016. Our main products are EMT conduit, IMC conduit, RSC conduit, aluminum conduit, stainless steel conduit, junction boxes, flexible conduit, C channel and related accessories. We have UL certificates for our products of EMT conduit, IMC conduit and junction boxes.
Our products widely exporting to many countries, such as the USA, Canada, Italy, Middle East, South Asian, etc with our good quality and reputation. Warmly welcome all customers and friends to contact and cooperate with us. Thank you for your interest in our products and service.
Our Service:
1. 24 hours prompt reply by email2. Other thickness & size also available on request
3. 30 years warranty (special material rate, installation in relative humidity 97% below & 050 ºC
in the room, no deformation)
4. Free samples for your reference
5. Flexible terms of payment (T/T, L/C, DP and so on are all accepted)
6. Excellent after-sale service
