Audited Supplier
PAR56 POOL LIGHT LED BULB
This PAR56 pool light LED bulb is designed to replace an existing PAR56 LED bulb. It is fit for an
internationally standard PAR56 swimming pool light niche.
The PAR56 replacement light is used to replace the pre-buried underwater pool lights that are in use or have been installed. It can be compatible with the pre-buried accessories of internationally standardized PAR56 underwater lights, allowing for low-cost replacement of pool lights. The PAR56 pool lights come in single-color or RGB options, with power ratings of 12W,18W,25W. They can also be paired with a mobile APP or remote control to enable long-distance operation of the lights, including color change and speed control. This makes them the most popular choice for pool lighting.
| Model | Volt | Power | Led Qty | White(Lumen) | RGB(Lumen) | Beam Angle |
| PAR56-05-12 | 12V/24V(DC/AC) | 12W | 144 | 1377 | 706 | 120° |
| PAR56-05-18 | 12V/24V(DC/AC) | 18W | 261 | 2146 | 896 | 120° |
| PAR56-05-25 | 12V/24V(DC/AC) | 25W | 351 | 2763 | 1359 | 120° |
REPLACES HALOGEN BULB
ENERGY SAVING 95%
Standard dimesion fits to all pools design
Suitable depth range under the water for light installation:1~5 meter.
Maximum water temperature range for light operation:-20ºC~38ºC.
- Make sure the new bulb is suitable for this underwater light. It is best that the new bulb is with the same specifications as the old bulb.
- Check the waterproofing performance of this underwater light every time the light fixture is disassembled. Replace the old waterproof fittings when necessary.
- Unscrew the pilot screw and pull top of the face ring, remove the light assembly from niche and gently place assembly on the deck. It is not necessary to drain down the pool.
- Unscrew the nuts on the back of the light assembly to allow the bottom clamp to be removed from the light fixture.
- Install the new bulb.
- This underwater light is designed for use only when fully submerged in fresh water, connecting with a safety transformer
- Only 12 volt or 24 volt low voltage input is suitable for this product, according to its own specifications. A safety transformer is essential when carrying out the installation of this product. Failure to do so may result in the the injury, death, and damage of this product.
- It is recommended to install a light every 20square meter, or every 1W (or above) for 1square meter. Choose corresponding lights in according to the approximate exposure area of each light, and match it with your swimming or spa pool.
We are specialized in R&D, manufacturing and marketing of pool lights for more than 10years.Factory was founded in 2011and has passed IS09001 and SGS certification.All of Products have passed CE, RoHS,CB, IP68, ect.
